Search results

  1. alldodge

    Maybe my turn for new boat time

    Either way my point is, it's not on a lift. I've had paint removed and re-painted but don't really want to do that again, but would be willing if cost was lowered enough
  2. alldodge

    Maybe my turn for new boat time

    Have been watching it and it's a slight "maybe". Hours are ok but it's been bottom painted and probably spent it's life sitting in saltwater except during the winter. There was a 2024 model in FL that was 20K more, but it's gone now
  3. alldodge

    Maybe my turn for new boat time

    Don't know what they would sell one actually for because a 2 year old with V8 is selling in the 280K range. So they sell much less or there is one heck of a deprecation.
  4. alldodge

    Maybe my turn for new boat time

    New is always pricey an new always list MSRP, and looking into performance V8 300 and V10 350 isn't much due to added weight Been in discussion with Formula in Decatur but they have no used currently. Sent me links to a 2025 with V8 and 2026 with V10 V8...
  5. alldodge

    Maybe my turn for new boat time

    The lock nut is item 30 and lock tab is item 31. Once nut is tightened the tab is bent to hold the nut
  6. alldodge

    MC TB5 Throttle/neutral issues

    If the cable was in the jaws then no
  7. alldodge

    1990 Force outboard 230ho removed upper bearing by cutting and left a crease need advice

    Which motors used crank 817400T3 ?
  8. alldodge

    Maybe my turn for new boat time

    My thoughts also Keep looking at a used Formula 310 OB, might be doing a trade if I can find the right one
  9. alldodge

    Yamaha F225 ECU Upgrade

    Don't know Yam's but don't see this as a ECU, this is the chartplotter setup issue. Most all have setup routines and it just needs to be setup in the menu
  10. alldodge

    Maybe my turn for new boat time

    Late follow up and something new Boat ran well all season, trim gauges in sync. End of season 2024 while changing the gear lube I found some water on the port side. There wasn't much but that was the reason at end of this season (2025) I wanted the dealer change it. Took it in a couple days ago...
  11. alldodge

    Shift interrupt switch

    Green/White wire? Post a pic of your distributor
  12. alldodge

    I/O (Sterndrive) Conversion to Outboards

    Drum roll
  13. alldodge

    Shift interrupt switch

    I'll be asleep by then, LOL
  14. alldodge

    MC TB5 Throttle/neutral issues

    I say Normally with a grain of salt, but normally to remove the neutral button the shifter is moved full forward and then the button can be removed. Removing it in neutral position can break part of the button inside All the button does is disengage the drive cable from moving forward. All this...
  15. alldodge

    I/O (Sterndrive) Conversion to Outboards

    When I was in the USCG we were required to put zinc chromate on any bare aluminum prior to paint, figured Merc would do the same as a bonding agent
  16. alldodge

    MC TB5 Throttle/neutral issues

    If the drives goes into F/N/R correctly than problem is in the binnacle
  17. alldodge

    Budget friendly MEFI 1 communication tool

    Need a paperclip and 12V resistor LED or paperclip and a voltmeter with a tone function. Turn key ON and watch the flashes or listen for beeps Rinda sells a tool
  18. alldodge

    Shift interrupt switch

    Remove the 2 jumpers and place motor with just the shift interrupter switch connected. Turn key ON and see if you have 12V on both sides of the switch. If there is 12V on both sides of the switch, you have the wrong switch
  19. alldodge

    Shift interrupt switch

    Think of it like this, if you had a Bravo drive the connection to the distributor would not be there. No shift interruptor switch and no wire on the plug at all. This pic shows the 12V connection used to set timing. Note the 2 jumpers, one to bypass switch and one to place ignition module in...
  20. alldodge

    Shift interrupt switch

    There should always be 12V to the coil. The switch does nothing to supply voltage until to the single wire going to the right side plug until shifting into neutral. You sure you have a NO switch and not a NC one?
Top