Search results

  1. MickLovin

    82 35hp chrysler wiring help please

    Re: 82 35hp chrysler wiring help please This is what I could find so far, but others may help more Frank!!! LOL
  2. MickLovin

    Help Frank :) - 100HP Chrysler carburettor change from wb24B to TC5D

    Hi all and especially Frank, my new carbies have arrived and before I start putting them on, is there any thing I need to know for setting them up, will it be the same process as Frank's Sync and tune video or the manual set up per the book, both being the same, but I am not sure with these as...
  3. MickLovin

    Chrysler 100HP Purple charging/signal wire for Ammeter??

    Hi guys, just another quicky, Can you set up an ammeter on the purple charging wire of the 100hp chrysler, and if so do you know what size shunt i would need for it. Also what's a good quality ammeter for these motors or wouldn't you guys use one??? I am an electrician by trade so no problems...
  4. MickLovin

    12.9hp Chrysler Lower unit seals

    Ok, after running this motor for a while I pulled the lower unit oil screws out to check the oil and found it already black and with water in it, after changing it when i got the motor. Looks like I need new seals, so may I ask is it the seal in the water pump housing and the one below the...
  5. MickLovin

    Fuel pump diaphragm

    Re: Fuel pump diaphragm looks exactly the same as my Chrysler pump and yes they are easy to do, with any bolt though I always use anti-seize when I am working on my motor. You will need the gasket as well as they always break when you are trying to replace the diaphram.
  6. MickLovin

    Kill switch on Chrysler 100HP

    HI, does anyone know if the Chrysler 100HP came with a kill switch, I am thinking of installing one as I am always fishing in my boat by myself. Thought it maybe a piece of mind, but also I like to move around the boat so not sure. :confused:
  7. MickLovin

    Aussie Chrysler Club via iBoat Friendship

    HI, I am unsre if this against the rules and have no intention of breaking any I have read. I would like to start an Aussie Chrysler Club within iBoats forums, through adding friends in Australia who have Chryslers or Force outboards. This may help all of us locally to private message each other...
  8. MickLovin

    Overcharging 18 volts

    Re: Overcharging 18 volts
  9. MickLovin

    Best manual for a 100HP chrysler

    Hi guys, just a qucik question and some advice on which manual to get for my Chrysler, I already have a manual from when I owned my 75hp but it doesn't show enough detail and it is pre 1976 models and my 100hp is 1979, but it is more about some more detail. Is the Seloc manual or Clymer manual...
  10. MickLovin

    12.9HP with exhaust fumes out in the cowl

    Re: 12.9HP with exhaust fumes out in the cowl Could you tell me if it is worth repairing the 12.9hp, my thoughts were to pull the power head off and replace the gasket, then put a plate over the hole and bogged it, am I kidding myself or is this a viable option, the only other way I can think...
  11. MickLovin

    Differences between a 1972 12.9hp Chrysler and 6hp Chrysler

    Hi guys, Bought a 12.9hp motor for $23.30, I cleaned it up which involved repairing a hole on the right hand side as you look from the front, I opened up the hole to find more corrosion, after cleaning the area I prepared a metalic bog and bogged over the hole while covering the exhaust vent...
  12. MickLovin

    12.9HP with exhaust fumes out in the cowl

    Re: 12.9HP with exhaust fumes out in the cowl Thanks guys I will endeavour to look at this today and get back to you, it did have a corrosion crack on the side which I repaired with automotive bog, maybe the hole in it was an exhaust port which I may have blocked up causing the exhaust to try...
  13. MickLovin

    Chrysler outboard 100HP no spark

    Re: Chrysler outboard 100HP no spark Both motors running and ready to go!
  14. MickLovin

    12.9HP with exhaust fumes out in the cowl

    I am having exhaust fumes coming through between the power head and where it is bolted to, letting exhaust come into the cowl and choking the engine, the engine runs fine without the cowl but as soon as you put it on it suffocates it, the only gasket I can see on the parts list of where it might...
  15. MickLovin

    help! 100HP spark problems - distirbutor

    Firstly I will start by saying that I have a 1979 100HP Chrysler outboard model 1007H9A from memory, ok firstly I went to start my outboard today and remembered last night I had actually shorted a wire on my ammeter so I was a bit worried about starting it. Ok so no start it wound over as usual...
  16. MickLovin

    12.9hp Pull Cord (won't stop looking)

    HI out there, I am on again letting everyone know if they have a junked 9.9 to 15hp Chrysler, that I am looking for the manual starter don't need the rope but need the recoil part.:pray2::positive:
  17. MickLovin

    12.9HP chrysler model 122HC 1972 or 1

    Re: 12.9HP chrysler model 122HC 1972 or 1
  18. MickLovin

    Pull start recoil unit for Chrysler 12.9hp

    Re: Pull start recoil unit for Chrysler 12.9hp I am after part no's 13, 14 and 15 of the following diagram
  19. MickLovin

    Pull start recoil unit for Chrysler 12.9hp

    HI guys, I am not having much luck with my pullstart or finding parts for it, so if there is anyone out there that may have a spare pull start recoil for a chrysler 9.9 - 15hp let me know plzzzzzzzzzzz!! :blue:
  20. MickLovin

    12.9HP chrysler model 122HC 1972 or 1

    Hi guys, I need to rattle your brains for a lower unit gear oil seal for this model chrysler and also the impeller part no. I am not sure but I think the part number for the seal is F901307-2 and I think the impeller is F436065-2 but I am not sure on either and would like someone to advise
Top