Search results

  1. johnmark

    1983 50hp Johnson Dies when I give it the gas(bad lower seal?)

    Thank You for your time ; I have a outboard I just bought. It's a 1983 50 hp johnson model J50BELCTA iT starts right right up and idles fine after I put in gear and give more throttle it justs dies on me. Also when I putted back to the dock I took it out of gear and the motor was just idiing and...
  2. johnmark

    What Year Chrysler

    I have a Chrysler model #62HD Ser.# 6436 need to know year and Fuel Mix/Carb Adjustment, Please Thank You, John Mark
  3. johnmark

    what kind of boat is this ? Now with bigger Photo's

    I was told it's a 15 ft 1961 glasspar I was wondering what model / HP rating.Thanks guys,John
  4. johnmark

    What kind of wire from points to the coil ?

    I have a 1976 35 hp Evinrude (E35602S) I found some bad wires from the points(leaving the flywheel) going to the IGN.coil(they also tap off to the kill switch). is this a resistor wire ? if I use a reg. conductor will I burn up my new coils ? thanks everyone ,John
  5. johnmark

    New coil ,now arcing around sparkplug boot ?

    Hi I have a 1976 evinrude 35 hp (E35602S) I insalled a new IGN. coil and fired right but seems to be missing a little and i can see it arcing around the sparkplug boot its even leaving a black ring around the plug. and this was in the sunlight. and yes it knocked fire out of me when i some how...
  6. johnmark

    Clutch dog slipping ?

    I have a 1976 35 hp evinrude (E35602S) when trying to reach WOT the motor will hit(clunk)hard against the transom then go a little futher then hit again always when the rpm's pick up ( new prop on the way) . If the clutch dog was slipping would'nt the motor rev up then catch again I'm lost on...
  7. johnmark

    outboard bucking the transom

    I traded for a 1961 15 ft glasspar with a 1976 35 hp evinrude the prop is chipped on all the blades really bad shape. I found water in the lower unit,installed new o ring on the bushing,replaced the retainer bolts (they would'nt tighten down) took it to the water and putted around alittle did'nt...
  8. johnmark

    Outboard information model 35602S

    Just got handed a 35 hp evinrude model 35602S is this a short shaft ? are parts still available? not pumping water .was wondering what the"S" at the end of the model # stands for (starter), (standard), (short)? thanks a ton, John
  9. johnmark

    motor wants to die when i pump the gas bulb

    motor wants to die when i pump the gas bulb 1986 8 hp (e8rcde) seems to flood the first time i start it .I've heard pumping the bulb should have no effect on a running motor.wondering if it flooding when i pump her up after connecting the fuel hose too ? float seat ? fuel pump ,maybe primer...
  10. johnmark

    8 hp outboard flooding when I pump bulb ?

    I have a 1986 8 hp (E8RCDE) It has become hard to start lately and I noticed while I was trolling I pumped the bulb and she wanted to die out. thought maybe theres a connection with my starting troubles flooding ? Thanks Guys John
  11. johnmark

    weight of my motor (E8RCD)

    I have a 1986 evinrude (E8RCD) I want to have shipped and need to know it's weight. Thanks , John
  12. johnmark

    Will parts from a 86 johnson 6hp interchange with a 86 evinrude 8hp?

    I have an 1986 8hp model # CE8RCDE I use in saltwater. I have found a johnson model # J6RCDE used only in freshwater,the guy admits he ran without oil mix gas.(bad thing) but I'm thinking maybe alot of parts I can use from this motor. Midsection ,tiller ,ect... Without having to look up each...
  13. johnmark

    Are there Matching parts on the 6hp and 8hp ??

    I have an 1986 8hp model # CE8RCDE I use in saltwater. I have found a johnson model # J6RCDE used only in freshwater,the guy admits he ran without oil mix gas.(bad thing) but I'm thinking maybe alot of parts I can use from this motor. Midsection ,tiller ,ect... Without having to look up each...
  14. johnmark

    1940 Johnson Model AT-10 any info???

    Anyone have any information on this motor , photos, service manual, I'm thinking about trying to restore one as my first restoration. something I can take my sweet time with and at the same time learn a little something about motors from back in the day. :) anything helps Thanks, John:)
  15. johnmark

    Old Johnson Year ?

    Could anyone tell me what year and HP. a Johnson model AT-10 would be Much Thanks, John
View older results
Top