Search results

  1. B

    96 mercruiser fuel pump wiring

    long story short, finishing up complete rebuild of my 96 lund tyee with a 4.3 LX. my fuel pump is not working. i checked for power to the purple wire at the oil pressure switch. no power. i also have two purple wires under the dash that i marked with numbers on both sides of where i had to cut...
  2. B

    '96 lund tyee 1850 floor rebuild and foam replacement.

    currently making a bunch of hidden panels like the inner side to the glove box, and the end of the rod lockers. also making new wood pieces for the doghouse, and the rear seats. i need more time!!!
  3. B

    '96 lund tyee 1850 floor rebuild and foam replacement.

    glove box and cluster installed!!! got most of the wiring done, only a few more wires i need to figure out.
  4. B

    '96 lund tyee 1850 floor rebuild and foam replacement.

    new and old dash inserts.
  5. B

    '96 lund tyee 1850 floor rebuild and foam replacement.

    and the old front now compartment panel. new one in process.
  6. B

    '96 lund tyee 1850 floor rebuild and foam replacement.

    new bow side compartments, with the old one beside. also trying to figure out how to fix/ or remake the dash panel inserts. think i’ve got it figured, but will see how it turns out.
  7. B

    '96 lund tyee 1850 floor rebuild and foam replacement.

    got the rod lockers in! coming together slowly. nice to have these bigger pieces out of the way in the shop.
  8. B

    '96 lund tyee 1850 floor rebuild and foam replacement.

    got them in! needed a little tweaking, and i still need to screw down the center pieces, but gotta get more screws!!
  9. B

    '96 lund tyee 1850 floor rebuild and foam replacement.

    surprisingly difficult and time consuming. but got them done. now to install them!!
  10. B

    '96 lund tyee 1850 floor rebuild and foam replacement.

    building the console front/ sides
  11. B

    '96 lund tyee 1850 floor rebuild and foam replacement.

    console front/ sides, and bow side compartments cut and first coat on.
  12. B

    '96 lund tyee 1850 floor rebuild and foam replacement.

    polished up the side interior rub rails. came out pretty good!!
  13. B

    '96 lund tyee 1850 floor rebuild and foam replacement.

    got the rear deck panel installed!! had to paint individual screw heads because i forgot there was a board under this deck. but sandblasted the head and epoxied then painted the heads with a tiny brush.
  14. B

    '96 lund tyee 1850 floor rebuild and foam replacement.

    also found a great deal!! $50.00! took about ten mins to clean up with some hydrochloride acid hull cleaner.
  15. B

    '96 lund tyee 1850 floor rebuild and foam replacement.

    got a bit more done!! side panels are built, although i need to iron out some wrinkles, but otherwise good. and installed the rear deck.
  16. B

    '96 lund tyee 1850 floor rebuild and foam replacement.

    looks good. i had no corrosion, but i did get a few old mounting holes welded up. left some very minor distortion, but it’s all good.
  17. B

    '96 lund tyee 1850 floor rebuild and foam replacement.

    think i used 6 sheets of plywood, but i am replacing every single piece of wood in the boat. and 2 more 3/4” sheets for the transom. i used 4/5ths of the 80 lb kit. i didn’t get to the foam under the rod lockers, as i found dry foam around them, and i didn’t want to take any more rivets out...
  18. B

    '96 lund tyee 1850 floor rebuild and foam replacement.

    glad it helped. hopefully i can get back on this project soon. as usual, life gets in the way. ask any questions you have, and i’ll try to help.
  19. B

    Gear oil hose

    should have a nipple for the hose seen here not sure why the pic is rotated
  20. B

    '96 lund tyee 1850 floor rebuild and foam replacement.

    new vs old side panel piece and new rod locker door. just waiting for o e more part before i can assemble the side panels and install!!
Top