Search results

  1. S

    can anyone tell me the year of this 65hp merc

    serial # 3549186 thanks or guide me to a site I've been looking can't find anything
  2. S

    What Did I miss? (lower unit wont drop)

    Removed the 6 screws, unbolted bottom bolt inside leg. must be a hidden bolt or something????? 64 40hp johnson supereahorse :confused:
  3. S

    Thinking about re painting my outboard

    have a 1977 70hp johnson looper seahorse. the cowl is in need of paint. dont want to do a hack job is there a place to get factory paint and have not worked with fiberglass much but the sanding process would I use a very fine grit sand paper? do they still sell decals?
  4. S

    impeller install 1964 40hp johnson

    going out to do this today. are there any hidden bolts to know about when dropping this lower unit? I see a inspection plate on the leg is this were I break the shaft to drop it? thanks Ted
  5. S

    1975 70hp johnson seahorse

    are these decent reliable motors? have a opertunity to purchace one with no spark issue compression is 135 on all 3 cylinders lower unit seems to go into gear. Im trouble shooting a 1985 85hp force right now was going to keep for my boat but was thinking I like this johnson better. read alot of...
  6. S

    wiring to key switch placement for 74 25hp evinrude

    hey guys trying to wire a key swtch to the 25hp anyone know what color goes were thanks Ted Happy Fathers day to everyone as well!
  7. S

    picked up 76 70hp johnson what prop is correct for this motor

    the prop on it is watsted not sure of stock prop it came with also no spark on her its a dark green motor with white cowling says 70hp seahorse good motor? comp was 138 in all 3 cylinders.
  8. S

    can't find an Impeller kit for my 1964 40hp johnson

    Im sorry I had my year wrong on this motor Napa offers the Impeller, no kit. do I need a kit? what about o ring etc do I need these ? thanks
  9. S

    no fuel to top cylinder

    getting no fuel to top cylinder 40hp seahorse clogged jet? ive been spraying carb cleaner in it going to take carb off and look inside any thing else I should check? thanks
  10. S

    Out of things to check on my 85hp force to why it blows breaker when I turn key on

    Ive checked and rechecked everything have no idea why this is doing this when I turn key in on positon the red wire feels very hot as well like its grounded but its not any other suggestions would be great I can't seem to find a schematic for the CdI and coil side wiring my book is not real...
  11. S

    How to wire a simple kill switch on a 68 40hp super seahorse

    this is just a simple coil, point, ignition. She dosent have a kill switch but does have a 3 way toggle switch with 2 wires coming off of it. has a starter but its not wired and there is no silinioed. would a ford silinoied work? to wire up that 3 way switch to use for the starter? if not...
  12. S

    68 johnson 40hp super seahorse/ think I made a mistake

    was checking the lower unit oil and pulled some sort of pin screw at the bottom do I need to crack the bottom open to get this screw/pin back in?
  13. S

    1992 lower unit question

    would this lower unit fit on a 96 90hp and is it a single shaft?
  14. S

    1985 85hp keeps poping breaker when I turn on ignition

    no Idea if the guy I bough this from wired this right it keeps blowing the fuse below the starter when I trun on ignition. checked all wires for grounding none found must be a wriing issues looked at my selco book Im guessing I have type II ignition wiring? I see smaller wires with #'s on them...
  15. S

    I think its a 1968 40hp super seahorse/super quiet

    model#j241968 there is 2 copper female outlets on the cooling cover one goes to the rich lean control looks like 1/4 inch metal tube and the other has nothing in it can I just plug this hole? also it's electric start with a 3 way toggle switch I think they used it for the starter it push up...
  16. S

    1992 150hp force

    I have this motor it has spark issues which the shop says will cost $800 to fix a modual? Im on the fence about either parting out or selling complete motor. is there a common modual that goes out can I do this myself it has 135psi comp on all 5 cylinders lower unit good just the electrical...
  17. S

    1961 evinrude 18hp lost spark

    Hello I installed a set of new coils today re set points put the fly back on and had great spark. pulled on her for about an hour still had spark then out of the blue its gone poped off the flywheel to check point gap still the same ( keep in mind this has not ran in 4 years) did not get...
  18. S

    how to hot wire to test compression 150 hp force

    No harness. was thinking I could jump the starter to check compression. ground to block and put positive to starter? would this turn it over thanks
  19. S

    any parts interchageable 85 85hp force & a 92 150 hp force

    picked up this 150hp for good price figured I could part out if nothing else it the guy I bought it from had it checked out at a professional marine shop everything was good , lower unit, compression, etc. the problem is the modual that gives it spark so it will run but sometimes not. was...
  20. S

    lower unit 1988 115hp/1972 80hp interchangeable?

    will a 1988 115 hp lower unit fit on a 1972 80hp if not what years and Hp will interchage? thanks also will the power trim fit on the 72 thanks again
Top