Search results

  1. J

    1976 25 hp, no spark

    I ordered a new coil to replace my cracked one
  2. J

    1976 25 hp, no spark

    is there a good reference site for what these coils and condensers should read
  3. J

    1976 25 hp, no spark

    Reading for driver coil in ohms. I also rechecked my coils. The one with the crack has a 0 reading from plug boot to ground.
  4. J

    1976 25 hp, no spark

    I don’t have a solenoid on the motor, atleast nothing on it I’m seeing looks like one.
  5. J

    1976 25 hp, no spark

    Is the driver coil the red coil with what looks like medical tape under the flywheel?
  6. J

    1976 25 hp, no spark

    Someone has lost the bolts that hold the recoil in place and the electric starter isn’t working at the time is reason for using the drill. I’m going to try to find bolts for recoil today
  7. J

    1976 25 hp, no spark

    I’m not quite sure where to go from here to get spark besides replacing the coils unless there could be some sort of ground issue?
  8. J

    1976 25 hp, no spark

    Some readings I did for my coils. Looks like one doesn’t match the other.
  9. J

    1976 25 hp, no spark

    I recently purchased this 1976 Evinrude 25 hp motor. It has great compression 140/140, I replaced the fuel lines and new fuel pump. It’s getting good fuel to the carb. I can’t get it to start. I sanded and set the points without luck. I know it has electric start and is missing some parts for...
  10. J

    What size motor to get for my boat?

    Perfect. I bought a 25 ho motor tonight. Has 140/140 compression. I’m excited to get this one up and running.
  11. J

    What size motor to get for my boat?

    It does. Boat is a 1980. I found that by looking up the hull #. I also looked up the specs on Google and I didn’t find a boat that matched my specs to boat.
  12. J

    What size motor to get for my boat?

    I should’ve been more specific I do apologize. My boat is a 16 foot Jon boat. The base of the transom is 54” wide and the beam of the boat is 70”. I will need a long shaft/tiller set up.
  13. J

    What size motor to get for my boat?

    I am back to the drawing board finding a motor for my boat. I own a 1980 smoker craft 16x54. I have no clue what model it is or what the max horsepower recommendation is. I’ve looked around online and I haven’t even found a boat that matched the specs for my boat. Wondering if anyone had...
  14. J

    Weird situation, looking for advice/how to repair

    That’s great news because I’ve got all that stuff with this 15 hp. I don’t think that will be too hard.
  15. J

    Weird situation, looking for advice/how to repair

    How reasonable/hard would it be for me to turn a short shaft 9.9 into a long shaft 15? I’ve got all the stuff here a have found a few non running ss 9.9s. I’ll move on from this motor gladly but thought this might be a decently viable option before throwing in the towel.
  16. J

    Weird situation, looking for advice/how to repair

    Put it up on marketplace as parts motor. 120/120 compression still just checked
  17. J

    Weird situation, looking for advice/how to repair

    I think you’re ultimately correct. Probably more work than it’s worth.
  18. J

    Weird situation, looking for advice/how to repair

    I’m wanting to pull the power head to replace the lower cowling. The center bolts from the bottom side are broke off. I’m unable to remove the power head until I get these removed.
  19. J

    Weird situation, looking for advice/how to repair

    I successfully removed the 3 bolts holding the power head onto the cowling. I snapped 2 of the 6 bolts that you’re talking about. I can take better pictures if it helps
  20. J

    Weird situation, looking for advice/how to repair

    Unfortunately they’re both from the underneath side.
Top