Search results

  1. D

    Kinda urgent help needed with exhaust shutters...

    60930 ought to be the correct part for your application
  2. D

    2001 Reinell 190 with Ford motor and OMC outdrive

    Some pictures would help Only reason being is i kinda wanna see this boat what has an og omc in place of an abated merc setup
  3. D

    Ford 302 spark plug read

    Plugs look fine according to the pictures Ford likey drinky fuel so feel free to install bigger jets, it won't hurt anything I really feel for a stock, naturally aspirated 302 you're looking too deep. If the engine is performing as expected there's no need for such scrutiny.
  4. D

    2 Questions

    Yes It's quite simple. Remove the cover and look. Rotating the trunion fore or aft at the shift cable end will adjust accordingly
  5. D

    Starting motor not charging

    Why cannot you verify? Again, why unable to verify?
  6. D

    Second mortgage for a carb?

    Holley oem power valves are clearly stamped with a vacuum value and are available for purchase individually from Holley Not uncommon to have issues when tuning a carb to a motor and have a backfire. This ruins the power valve so having a few on hand is a good idea
  7. D

    2 Questions

    In a hard turn the u joints are stressed to the maximum. Probably hearing something related to that. Have you pulled the drives to inspect? Shift cable adjustment is performed at the linkage located on the aft side of the driveshaft housing. Behind the cover. If the trunion is adjusted to be...
  8. D

    4.3 runs great for about 30 minutes then bogs, pops won't accelerate

    This thread is awesome
  9. D

    Odd shift cable fail

    Will default to post #4 again, however the first statement The updated, thicker, more tensiony v spring is painted yellow on the ends. I'm afraid I cannot explain that any more
  10. D

    1980 3.0L strange overheat issue

    Stuck lifter? Wrong pushrod/spring? Bent rocker? Tuliped valve? Are all the other valves sound and set proper?
  11. D

    Odd shift cable fail

    If you did you wouldn't have posted a situational explanation with no resolve Benefit of the doubt concerning your prowess, the interrupt switch has failed?
  12. D

    Lower shift cable issues alpha 1

    If you're looking for 9/16" end play and seeing 1-2" the inspection you're performing is not correct To go further, if the end play is indeed 1-2" then the installation was incorrect. As in, that cannot happen even if the installation was close but not quite correct Kinda like looking in the...
  13. D

    Volvo Penta 5.0 GXI-E - Won't roll over

    Sounds more like subaru head bolts
  14. D

    Fuel in oil, how many oil changes should I do?

    Yes Change it as many/few times as you like If it were mine I'd change it until the fuel smell goes away You can reuse the filter, or change it. Wondering if febreze in the filter would help with gassy smelly?
  15. D

    Chris craft scorpion wiring diagram

    But..... The wire colors? 888? Ford Not used by mercruiser in 1985 save for the 470 (kind of)
  16. D

    All-Around light pole rake

    If it's 360 the angle less than 20 degrees fore/aft is moot Flashlight and a white plastic drinky cup works in a pinch
  17. D

    Showing the Boston Whaler 13 some TLC . . .

    A testament to OMC. They had the inline two smoker dialed, like really dialed We won't talk about v engines Anyone know why some of these blocks were painted white and others black?
  18. D

    Lower shift cable issues alpha 1

    You are not inspecting the stated specification
  19. D

    Odd shift cable fail

    Post #4, second statement Take the time to witness how the shift plate system works. There's a lot going on there, you can't just glance at it a couple times and figure it out. It's like convoluted simplicity
  20. D

    Odd shift cable fail

    2023 I explained it?
Top