Search results

  1. C

    65hp evinrude no power

    Thank you for the input. Took the bottom carb off and apart. Float and needle seat looked good; no obvious blockage. Cleaned everything out as best I could and put it back on the boat. Started it up and no obvious change; pulled the spark plug wire for that cylinder and it ran the same with...
  2. C

    65hp evinrude no power

    Update. Was able to remove the drain screw from each of the carb bowls without removing the carbs. While removing the screw from each of the top carbs, gas drained out of the bowl. When removing the screw from the bottom carb, no gas came out. Removed gas supply hose to that carb with motor...
  3. C

    65hp evinrude no power

    Borrowed a second compression tester and the results are as follows, 150, 150 and 140 in the cylinder that is "bad". Those readings are well within the 15% margin. Checked the fuel pump diaphram and it was fine. I'm wondering, since there are 3 carbs on that motor, could the carb that feeds...
  4. C

    65hp evinrude no power

    I have a 1973, 65hp Evinrude that I need help with. The motor overheated to the point that it stalled. Since then I have changed the impeller, head and head gasket, exhaust manifold and gaskets, plugs and all 3 coils. I had it on the water today for the 1st time since overheating and it had...
View older results
Top