Search results

  1. M

    My 1984 Scorpion 167

    Just thought I would share a picture of my 1984 Scorpion. It has a 1985 Yamaha 115 hp v4. Runs excellent and I just had interior redone. This boat has been in my family since I was 15 years old (now 40 years old), so I grew up with it. My dad just got a 1996 Chris Craft Concept 17 to replace...
  2. M

    1996 johnson 25 hp no spark

    Hi, I have a 1996 Johnson 25 2 stroke 2 cylinder (yeah one of the bulletproof models), anyway I have no spark. I followed the repair manual and the only questionable test I hit was for the repair manual calls a sensor coil. when I tested between terminals b and c as the book states my meter...
  3. M

    Tachometer part number needed

    I have a 1985 Yamaha 115 v4 model 115etlk, i need a new tach. I have the factory analog Yamaha tach right now with the lights for the oil warning system on the bottom. On the back of the guage there are 3 wire outlets that lead to a square plug. I also have 2 leads that use bullet connectors...
  4. M

    Yamaha 115 oil tank

    Hi, I have a 1985 Yamaha 115 ETLK and I need a new sub oil tank. The original part number is 6E5-21708-05-00 I found a new tank with a different part number that looks identical except the wiring connector is a newer style using a blue plastic connector. Mine uses a white connector, the pump...
  5. M

    Question about my Evinrude 35 hp time capsule transom marking plugs or dowels?

    Hi, I just picked up a 1982 Evinrude 35 hp. I think it came out of a collection and was only started and ran a few times. It is utterly nice and I don't think it has ever been bolted to a boat. The guy I got it from said it was his uncle's who died and this guy didn't know anything about the...
  6. M

    1985 Yamaha 115 2 stroke water pressure guage

    Hi, I was thinking of adding a water pressure guage to my motor. Anyone know how to do this and where to pick up the port for the tube? It is a 1985 yamaha 115 v4 2 stroke. thanks
  7. M

    Prop and water pump question Yamaha 115 2 stroke

    I have a 1985 yamaha 115 and was thinking of getting a spare prop. I am trying to find some identifcation on the prop so I can order the same one. The only thing I see near the hub is 19 k or a (not sure which)., is there more identification somewhere else on the prop? my other question is that...
  8. M

    SUZUKI 9.9 OVERHEAT (someone help me)

    Hi. I have a new to me 1988 suzuki 9.9 outboard. i tried running it in a test barrel and wasn't getting much of any flow out of the telltale. I dropped the lower unit and replaced the water pump impeller and base plate. I check to make sure there were no obstructions in the water tube as well as...
  9. M

    Garden hose flush attachment for a 1988 Yamaha 15 hp

    Hi, my 1988 Yamaha 15 hp has a water intake under the cavitation plate. It does not have the traditional side intakes on the lower unit. Does anyone know what I need to run this outboard on the garden hose? I have a universal under plate flushing plate that holds on with wing nuts but it won't...
  10. M

    1986 Mercury 9.9 long shaft running troubles

    Hi I bought a nice looking 9.9 merc and it would not start. I cleaned the carb thoroughly put it back together and it still will not start. It will only start and run if I manually pull the bracket in front of the carb forward. as soon as I let it go it stalls out. It also sounds sluggish when I...
  11. M

    1988 suzuki 9.9 oil injected question

    Hi, I have a 1988 suzuki 9.9 The hose that goes to the top of the oil pump came off. I hooked it back up but I am not sure the oil injection system is working ok. Does anyone know if I need to bleed the system and how to do this with the limited room in there (you can't even see the oil pump...
  12. M

    suzuki dt 9.9 oil injected 2 stroke oil pump operation

    I have what I believe a 1988 suzuki 9.9 with oil injection. I am looking for a detailed explanation on how this system works. There is a see through hose at a y junction off of the moto fuel line conncetor. I see a little oil in that tube coming from the oil pump area but I have heard that I...
  13. M

    Fuel line connector issue Yamaha 4 hp 4 stroke

    I have a 2000 Yamaha 4 hp 4 stroke outboard. I am trying to buy a tank connector and a motor connector. I need the connectors that go on the fuel line with the bulb. I ordered a moeller complete fuel line setup but the connectors inside diameter is too small for my application.Anyone know which...
  14. M

    Tomos Travler 9.9

    Hi, I just picked up a Tomos 9.9, I need a fuel line connector to connect the fuel hose to the motor (there is one on the motor currently but I need the fuel hose side. I also need one to connect to the tank. There is one side on the tank but I need the one that attaches the fuel line to the...
  15. M

    Rust on Crankshaft throw Yamaha 4 hp 4 stroke

    Hi, I have a new to me 2000 yamaha 4 hp 4 stroke single cylinder. I bought it not running. It appears water got into it somehow. The gear lube looked fine but the motor oil was milky. I took the carb apart and it shows signs of silt. I am in the process of cleaning the carb. I did get it to fire...
  16. M

    Seating options for my new to me boat

    Just picked up this 1989 fisher sv14. Nice setup but I want to have a seating option for the front. There are times when my wife and 3 year old want to go with me and I was thinking about some type of bench seat maybe versus the pedestal front seat. I don't want a back to back seat because my...
  17. M

    Procedure for starting a 1987 Johnson 6 hp with primer

    I have a new to me 1987 Johnson 6 hp 2 stroke, it has no choke, has a primer. What is the procedure for starting. I would like to know the procedure for the primer, cold engine, warmed engine, and warmed engine after disconnecting the fuel line and running the carb out of gas (this one because I...
  18. M

    Siezed powerhead any ideas 2003 Johnson 25

    I have a 2003 Johnson 25 hp 2 stroke with a stuck powerhead. I lowered the lower unit to make sure the problem wasn't in the lower unit. I have tried the product Engine Release two times following the directions exactly (the product actually worked on a NIssan 8 hp I had with siezed pistons. I...
  19. M

    Johnson 25 hp powerhead interchange?

    Hi, I have a 2003 Johnson 25hp 2 stroke with a siezed powerhead. I have tried to unsieze the motor but it is not happening. I am now looking at replacement powerheads. Does anyone know if a powerhead from a 1993 25 hp will work on my motor? I looked up part numbers on boats .net and the...
  20. M

    Adjusting shift linkage 2001 Mercury 6 hp 2 stroke

    I have a 2001 mercury 6 hp 2 stroke. It has a shifter built in to the throttle handle. It is out of adjustment in that when you select neutral the lower unit is not fully shifted out of neutral. It is hung up in forward slightly. Anyone know what to adjust to get this lined up better. I see...
Top