Search results

  1. roscoe

    1972 merc 110 Blue Stripe hood, Ser# 3267158 Exhaust/Steam? coming out taletail

    As said above, make sure you measure the diameter of the driveshaft because they were made with two different shafts. Have to get the corresponding impeller. There should be no water in the gearcase. And no lube above the gearcase. You can pressure test the gearcase with 2-4# of air, no more. A...
  2. roscoe

    1996 FORCE 75hp cowl LOWER SEAL replacement??

    IF exhaust is getting into the engine, it is not getting in through that cowl seal. It is getting in from below the powerhead. From the exhaust gasket / spacer plate / exhaust tube.
  3. roscoe

    1972 merc 110 Blue Stripe hood, Ser# 3267158 Exhaust/Steam? coming out taletail

    If you don't know when the when the water pump impeller was last changed, start there. And thermostat. A repair manual that covers the motor should get you through the impeller change. A Clymer manual is ok. Factory manual ok. Selor manual no so good.
  4. roscoe

    Mounting Kicker on 1989 Bayliner Capri

    OK, but still likely a hollow spot there, never seen curved transom wood. Gonna have to get in there and check, and probably add a big form fitted backing plate, then anchor with thru bolts.
  5. roscoe

    Correct spark part size

    NAPA Advance auto amazon sparkplugS.com
  6. roscoe

    New boat

    You want the smallest that you can sleep 4 people in, for a couple of nights? AND still have 4 happy people afterwards? That is if no one was thrown overboard. If you want to "weekend" a few times a year, rent a houseboat. Or a cabin on a lake, best of both worlds. One person, or maybe two...
  7. roscoe

    Mounting Kicker on 1989 Bayliner Capri

    I"m guessing there isn't much/any structure behind that part of the transom. This is an i/o boat, correct?
  8. roscoe

    Throttle and idle controls

    won't hurt to pop open the control box and grease the pivot points and cable ends with a little light grease. I wouldn't worry about the cables themselves.
  9. roscoe

    1974 Starcraft info?

    I see. Well, then we start from scratch. Who has a brochure hard copy ? Who can scan and or host images?
  10. roscoe

    Throttle and idle controls

    Sounds about normal to me. Throttle increase is further forward so that you can put it into gear, without accelerating. But my neutral is a noon. The boat doesn't go out at midnight. :)
  11. roscoe

    Options for towing boat w a non tilt/trim small outboard (25 hp)?

    start with a 2x4 about 14" long. Drill a hole in it or screw an eye bolt near each end. Raise motor, place 2x4 into space between motor leg and the transom mount. Lower motor. Wire, tie or bungee the 2x4 in place so it can't fall down. Now tie the motor down by securing a small ratchet strap...
  12. roscoe

    Anyone have the brochures available ???

    Since the last software upgrade, all the links to the brochures are garbage. Anyone have them copied? Maybe a few hard paper copies? Anyone have the ability to post them and make them available if we can gather them together? I have a hard copy of 1966.
  13. roscoe

    1974 Starcraft info?

    We do have the "Starcraft forum", maybe post there, asking for info. https://forums.iboats.com/forum/starcraft-boats.131/
  14. roscoe

    1974 Starcraft info?

    Well, its got a HIN on the transom, so it looks to be '74 or newer. You won't be finding "period correct" parts, unless you find some on ebay or a junkyard. The vinyl back then was make with chemicals they can't use now days, some you will be left using the modern day inferior version. An...
  15. roscoe

    Source for spacers?

    just googled "spacer 1" OD 1/2" id" https://www.toolplanet.com/product/Woodstock-Spacer-W1163/lathes-jointers-routers?gclid=EAIaIQobChMI-vWrodTt8AIVZQnnCh2iYQA_EAQYASABEgJbZvD_BwE...
  16. roscoe

    Pontoon sitting for over 10 years

    The answer to many of your issues starts with a trailer. Buy, rent, or borrow one for a day and get it out of the water, onto dry land, so you can work on it properly. The cylinders should be soaked in oil, not wd40. Then grab the flywheel and turn the engine a few revolutions. Oil it again and...
  17. roscoe

    Beginner beginning a complete restoration - Starcraft 18

    Yes Yes Don't fill the boat. Make sure it is clean and dry, then put it in the water. Use a grease pencil to mark leaks you find. Some sprinkle flour in the hull to help to see any seeping moisture.
  18. roscoe

    timing check

    It would be interesting to hear how it runs in Minnesota, after being tuned for mile high Denver.
  19. roscoe

    1975 Mercury 115 EL OB w/ Controls value?

    Your boat can handle it. Throttle back a bit if you don't want to go so fast. I had a Starcraft 18 SS with a 65 on it. Ran ok, once you got on plane, which took a while. Replaced with a 115 hp Merc. I also have a Starcraft Mariner 18. It also has a 115 Merc. I wouldn't even think about going...
  20. roscoe

    Why's the boat leaking?

    Don't worry about damaging your bilge pump by running dry. Whether you have a centrifugal or diaphragm type pump, it can be run dry. The only long term damage will be minimal if any at all.
Top