Search results

  1. S

    67 Johnson 40 HP electric shift wiring

    Also, is this wire in? What's weird is color code doesn't seem to work.
  2. S

    67 Johnson 40 HP electric shift wiring

    When I trace your wiring schematic, one of the wires that comes from your cut out switch goes to the solenoid so not sure why you say starter switch. Also, I could not find your soloniod in the starter group breakdown but did find one on eBay. I don't see anything out of the ordinary though...
  3. S

    1999 Johnson 35hp 3 cylinder

    I'm thinking you got plugged up somehow in the no wake zone or you have a bad thermostat. Start with the water pump but then you may need to go through some more stuff. Don't ignore it though because it's bound to come back.
  4. S

    Evinrude 9.5 how long until thermostat opens

    Some readings for you.
  5. S

    1999 Johnson 3 cy 35 hp overheating?

    That was 17 years ago. Make a new post explaining what you need to know.
  6. S

    Evinrude 9.5 how long until thermostat opens

    I thought I included this in post 31 but I don't see it. Have you read this? http://www.leeroysramblings.com/OMC_9.5.htm
  7. S

    Suzuki PU140 1991 Stalling out?

    Possibly the fuel line diameter? Would seem to be starving for fuel.
  8. S

    Yamaha 4SG leaking water around tilt lock plate pin

    I had a newer 4 hp but the leg configuration was the same. The rubber cover is where you disconnect the shift linkage....Never really looked at mine but I wouldn't be surprised at all to see water coming out from the spot you pointed out. Did you check head temperature?
  9. S

    2006 Johnson 9.9 CYL Head

    This is a 6 year old post, pretty sure you won't get any info. Start a new post, post model number and ask what you are looking for or what your problem is.
  10. S

    How much water?

    No gators....just Bigfoot!
  11. S

    JOHNSON 9.5 OUTBOARD MOTOR SPARK PLUG PROBLEM

    Don't you mean J4c
  12. S

    How much water?

    I would pull the foot and inspect/double check pump. After installing you can put a cordless drill on the driveshaft and test in a barrel of some kind. I would want to know before I went to the river.
  13. S

    How much water?

    You might have burned up the impeller running it without enough water. Either way, pull the gearcase and be done with it.
  14. S

    How much water?

    Because it's being forced up there. Pump is not self priming so must be higher than the pump at least when running in a tank. Clip some muffs on it or raise your water level.
  15. S

    1977 Evinrude 85hp - Oil Leaking from Air Silencer Cover

    Could be a small crack in your air box.
  16. S

    How much water?

    You say you flushed it out through the water pump discharge. Do you mean the pickup tube? If you did flush through the pickup tube and water came out and it won't with the pump than you must have done something wrong. Keeper seems the most likely.
  17. S

    Evinrude 9.5 how long until thermostat opens

    Everything you want to know about your motor and more. http://www.leeroysramblings.com/OMC_9.5.htm
  18. S

    1977 Evinrude 85hp - Oil Leaking from Air Silencer Cover

    In my experience when the motor is tilted gas mixed oil goes into the air box but the OP said it never did before. Another words you don't need to explain it to me.
  19. S

    1977 Evinrude 85hp - Oil Leaking from Air Silencer Cover

    OP says oil in air box now but never was before. Can you explain that?
  20. S

    Evinrude 9.5 how long until thermostat opens

    Post number 7 addresses that or post 20 is good too (Leroysramblings)
Top