Search results

  1. Scott Danforth

    too much voltage?

    some outboards have a voltage regulator, some do not.
  2. Scott Danforth

    2006 Volvo penta 3.0 glp-e misfire on cylinder 4

    take it to a machine shop and have them machine .020" off the surface
  3. Scott Danforth

    91 Penta 431

    Bilge garboard drain should be on transom, just above keel Being a 1991 boat, you need to check for rot. Water in the cuddy will mean lots of mold, mildew and other issues
  4. Scott Danforth

    High oil pressure 2019 volvo 4.3

    Start with servicing the raw water pump
  5. Scott Danforth

    1991 California cool

    Depends solely on it's condition and the local market As far as any brand being a collector item. No collector value there except for maybe one guy somewhere that has a nostalgia connection How is the hull? Motor? Jet drive? Trailer? Interior? Pics would help us with suggestions
  6. Scott Danforth

    Need service manual for 40hp Mercury

    Did you go to the only legal place for a manual. Your local dealer or from Brunswick directly http://publications.brunswick.com/
  7. Scott Danforth

    Boat Disposal

    I have cut up boats with a sawzall, and tossed pieces in the garbage can over a period of a month. I have also loaded up the parts and taken to the local land fill
  8. Scott Danforth

    help help help overheating Mecrusier

    Did you replace the whole water pump assembly or just an impeller? I recommend the whole pump kit
  9. Scott Danforth

    Help with new Lenco Trim Tab Switch

    No cutting and splicing needed. Only wiring it correctly per the schematic. You have 2 wires swapped So pull the switches back out. Go thru the wiring and make it match the schematic
  10. Scott Danforth

    2022 merc 115 wont trim up

    Then get the factory service manual and check the connections to the relays and switches
  11. Scott Danforth

    Non slip adhesive padding - removal and replacemet

    I originally did stick-on non-skid. Then I added non-skid sand to the top layer of paint
  12. Scott Danforth

    2022 merc 115 wont trim up

    Your boat is under warranty. See your dealer
  13. Scott Danforth

    No spark after points change

    All points need to be filed before you gap them and adjust dwell
  14. Scott Danforth

    Non slip adhesive padding - removal and replacemet

    Acetone soaked rag to get the old adhesive off. You may never find what was there originally
  15. Scott Danforth

    vinyl and foam padding

    If you install foam to the trailer it will keep water against the trailer and rust it out in 6 months
  16. Scott Danforth

    Snap in flooring material

    Seadek is a glue in product
  17. Scott Danforth

    help help help overheating Mecrusier

    The one in the factory service manual
  18. Scott Danforth

    Leak in Hull (found). Would like guidance to repair

    go to the top of the forum. the first few topics are stuck like a postit note. 4th one down is the DIY. go from there
  19. Scott Danforth

    2006 Volvo penta 3.0 glp-e misfire on cylinder 4

    looking at the elbow pic (riser is just a riser, that goes between the elbow and manifold), you need to machine off about 0.020" or more to clean up the surface that is where your leak is coming from.
  20. Scott Danforth

    Should I replace my surge brakes with electric on my boat trailer?

    do you have a brake controller in your tow vehicle? if not, electric brakes wont help until you do electric brakes wont last the 25 years your current set up did. you may want to check. two fully loaded drum backing plates may be same price as two new wheel cylinders. since you have to...
Top