Search results

  1. Scott Danforth

    Heat exchanger rad cap pressure

    It will be fine. They range from 7 to 18 psi depending on year, etc
  2. Scott Danforth

    EPA Info for 1998 Yahama 9.9 HP 4 stroke

    Get serial number of motor, contact mercury
  3. Scott Danforth

    Project Boat

    If it was pristine and running, the OP wouldn't be looking to swap to a diesel or outboard
  4. Scott Danforth

    1976 Chrysler 10hp throttle bushing

    Hacksaw, Dremel, and drill. About 15 minute project
  5. Scott Danforth

    Project Boat

    The age of the boat and the current powerplant put the boat at a disadvantage. The boat will have rot. So assume $3-5k to bring the hull and upholstery back to shape. And assume $2k for a used different motor/drive. If the intent is fishing, I would start with an aluminum dual console vs the...
  6. Scott Danforth

    290sp square trim gauge issues

    But a Ford Windsor V8 fits just fine in those square body Volvos
  7. Scott Danforth

    Manual needed, please. 1989 crestliner

    Manuals for boat generally do not exist. Other than about 12 manufacturers out of 150,000 over the past 100 years, they don't exist. Look at the wire colors on the back of the switches if you can't figure it out
  8. Scott Danforth

    290sp square trim gauge issues

    The square hole on the original dash was cut with either a sawzall or pneumatic body saw from the original stamped round hole
  9. Scott Danforth

    Hello all, I want to install a remote oil filter mount for my 4.3 V6, is it neccessary to replace the filter mount bypass valve?

    It's fine to do one or the other. Remove the bypass in the block and always run a filter with appropriate bypass check, or switch the bypass to a 30 psi unit and run any filter you want
  10. Scott Danforth

    Hello all, I want to install a remote oil filter mount for my 4.3 V6, is it neccessary to replace the filter mount bypass valve?

    https://www.wixfilters.com/Lookup/filterlookup.aspx Click on look up by size
  11. Scott Danforth

    Hello all, I want to install a remote oil filter mount for my 4.3 V6, is it neccessary to replace the filter mount bypass valve?

    Most filters have a bypass. It keeps the media from being crushed. The Wix website has a great cross reference of dimensions, and with and without a bypass
  12. Scott Danforth

    Trailer surge brakes

    https://www.etrailer.com/question-444322.html
  13. Scott Danforth

    Hello all, I want to install a remote oil filter mount for my 4.3 V6, is it neccessary to replace the filter mount bypass valve?

    There are filters with bypasses as well
  14. Scott Danforth

    Christmas 2022 will be coldest in over 30 years

    Christmas greetings from cousin Eddie
  15. Scott Danforth

    ZF550A

    Did you go to the ZF website?
  16. Scott Danforth

    daily music fix

    Worked on my end....
  17. Scott Danforth

    1962 Chris Craft Holiday 20’ bucket list resto

    Make sure to drain the manifolds and block
  18. Scott Danforth

    Quit My Job . . .

    AD, if Ted can't, I have a guy near Vonore TN that does covers on the side
  19. Scott Danforth

    290sp square trim gauge issues

    Check your connections. And yes they are expensive and NLA
  20. Scott Danforth

    Boat plate 10 o

    No. And today's motors are much heavier than older 2-strokes
Top