electronic spray cleaner is to wash away dirt from a TV tuner, not remove corrosion from battery cables
use sand paper or a wire brush chucked in the drill
the connections should be shiny and clean enough your mother in law will eat off them
once completed, then seal every connection with...
a late 80's bayliner with an L-drive
unless you were paid to take it, I would cut your losses now.
many parts for the motor are NLA
the hull will need to be restored.
transom eyelets are the strongest (rated to support 3X the boat's weight)
the ski hook (round eye with finger) is basically rated for about 400# of pull (the most you can generate by holding a ski rope
a wake board tower is basically rated for the same 400#.
now when a tube submarines, the...
I normally weld the outer sleeve to the inner section on the locks, then weld a nut to the top of the sleeve then use a wrench to remove
I have also driven in a few screws and used a vice grip
for the jet drive you have, you need to take it apart, blast it, zinc chromate prime it, epoxy prime it, then top-coat it
or take it apart, blast it, and then powdercoat it.
welcome aboard
what does your paperwork say the boat is?
what does the capacity tag on the back of the boat say you can have for a motor
without paperwork, you may not be able to register the boat in your name
new boats are stalled due to things like resin, engines, upholstery, and fittings
however forest green went out a few years back. black, grey, red, blue, etc sell
if painting isnt your thing, suggest contacting someone who does paint and have them do it.
i would use Axalta coatings and have custom matched to the powder coated parts
