Search results

  1. Berdink

    Sputtering Johnson V4 90hp - 1994

    Good eye! Yes, I have that in my cart for next order - along with the roller on the upper linkage. 😊
  2. Berdink

    Sputtering Johnson V4 90hp - 1994

    Here is the same time as the video above - when I first got it home and before seafoam. . . I'll see if I can get a video Wednesday for how it's running now.
  3. Berdink

    Sputtering Johnson V4 90hp - 1994

    I forgot I had a YouTube channel for when I was working on my 65 C10. . Here is a video of the Johnson running when I first got it home last week before I did seafoam - before it started running rough:
  4. Berdink

    Sputtering Johnson V4 90hp - 1994

    This time I took out the 2 small jets in the two outer small holes in the fuel bowl. They looked clean, but I still ran a small wire through the jets and blew through them and the holes with carb cleaner. Every hole I blew through, I made sure cleaner was blowing out the other side. I also made...
  5. Berdink

    Sputtering Johnson V4 90hp - 1994

    They were nice and clean under there.
  6. Berdink

    Sputtering Johnson V4 90hp - 1994

    I sure don't like the suggestion some gave to drill a small hole to get it. I don't like the idea of possible metal shavings. Another guy said the plug is soft enough to use a Sheetrock screw. I'll do some more searching on ideas how to remove it.
  7. Berdink

    Sputtering Johnson V4 90hp - 1994

    I didn't see any kind of oil up there at that top crank seal. . Everything on this appears to have been well maintained, inspected, and cleaned. There's dates on ignition things with 2016 and several of the fuel lines are 2015. . I did a fuel leak test on the lines. I put bed sheet scraps under...
  8. Berdink

    Sputtering Johnson V4 90hp - 1994

    I may have missed cleaning these holes:
  9. Berdink

    Sputtering Johnson V4 90hp - 1994

    I need to get a DVA for my Multimeter just so I know I've done a I've checked it all out. But with a 7/16 bright blue spark at all plug wires, I'm going to just go back into the fuel system for now - double check the carburetors. The fuel lines have a date stamp of 01 and 15, so I'll replace...
  10. Berdink

    Sputtering Johnson V4 90hp - 1994

    I pulled the flywheel to look over the stator. I saw on Brandon's Garage where he cleaned up and put some lube on the surface where the timer base rotates. I figured I'd do that while I'm in there. I'll also check to see if everything is clean and dry there at that seal.
  11. Berdink

    Sputtering Johnson V4 90hp - 1994

    Are you talking about part #4 ?
  12. Berdink

    Sputtering Johnson V4 90hp - 1994

    Are you asking about #2 here? I did not remove it. It did come with the kit.
  13. Berdink

    Sputtering Johnson V4 90hp - 1994

    I'll see how I might check that.
  14. Berdink

    Sputtering Johnson V4 90hp - 1994

    I pulled the flywheel to look at stator, the underside of the flywheel, and the timer base assembly. All look good visually. . I guess I'll start going through all the ignition diagnosis tests in the repair manual. Might as well order all new fuel hoses and fuel pump. .
  15. Berdink

    Sputtering Johnson V4 90hp - 1994

    Bright blue spark across a 7/16 inch gap on all 4 plug wires. Now what?
  16. Berdink

    Sputtering Johnson V4 90hp - 1994

    Were you posting this for me?
  17. Berdink

    Sputtering Johnson V4 90hp - 1994

    Yeah, that's what I suspected. I'll go through the process of elimination on the ignition starting from the spark, to the coils, to the power pack
  18. Berdink

    Sputtering Johnson V4 90hp - 1994

    Fresh non-ethanol gas mixed 50:1. New Spark plugs gapped at 0.030 inches. Runs the same as with the other tank of gas from before. Runs the same as with the older spark plugs. . Right from the startup and warmed up. Runs the same. . I'll check spark with spark tester at 7/16. Then I'll test each...
  19. Berdink

    Sputtering Johnson V4 90hp - 1994

    Well, the motor sputters exactly the same. Exactly the same. . The carbs did need cleaning, as my pictures above showed. There was also a small amount of goop at the bottom of the bowl. They are spanking clean now. I pumped the bulb just to verify it wasn't the fuel pump. It runs exactly the...
  20. Berdink

    Sputtering Johnson V4 90hp - 1994

    Yep, Under-cowl fuel lines require USCG Type A1-15 marine-rated hose.
Top