Search results

  1. B

    why noy poly resin alone for sealing plywood?

    just wondering, why it can't be used as a sealer? i put a single coat of epoxy sealer on my plywood floor, but that stuff is 150 bucks a gallon here. used 1/2 gallone for first coat, top, bottom ,and sides. wanted to put a coat of fibreglass resin as a top coat, just to further seal the wood...
  2. B

    '96 lund tyee 1850 floor rebuild and foam replacement.

    story: bought this boat a few years back, got it cheap, needed motor due to improper winterizing. found rebuilt 4.3 from jimmy, used allold parts from boat, all done 1000.00 bucks. great. runs great, except for a hesitation that i've yet to be able to find, will deal with that later in the...
  3. B

    aluminum boat floor repair questions

    just wondering if the decking on a aluminum lund tyee needs to have glass on it? was told by a buddy to just put a coat of resin on the wood, with no actuall glass, and that is enough to seal it. i'm using 3/4 plywood for the deck, so there is lots of strength. what do you recommend? it will...
  4. B

    need new axle, but how heavy?

    problem- I've been wearing out the inside of my tires. changed bearings, no difference. decided i need new axle, so i weighed my boat. it is a '96 lund tyee 1850, with a 4.3lx I/O. it rides on a shoreland'r single axle trailer with a 3500# axle. looked at weights of my boat and figured it was...
  5. B

    35 hp gearcase bearings

    ive got an 84 35hp, it was given to me with the gearcase in pieces. originally stripped the gears, but came with new ones. looking at parts diagrams, it says there are two bearings around the pinion gear(pn 0376856), but this gear case only has one. it appears there is room for two, so i wonder...
  6. B

    early 80's 35hp johnson lower unit? maybe.

    quick background- a friend bought this boat at an auction, and asked me to fix it. the lower unit was in pieces when he dropped it off. hasn't ran since the gears were stripped, approx ten years. couple of questions, first, is there a way to find out what year this motor is? the mounting bracket...
  7. B

    larger diameter okay?

    was wondering aabout trying a 16" diameter prop on my mercruiser. 1850 tyee, 4.3lx. no real reason, just that i've been playing around and all my props ive tried are 14-143/4". noticed suzuki props are 1`6" and have access to some. was told the splines will match. anybody know if they do? also...
  8. B

    removing anti-siphon valve for good?

    ''''''''''''''96 lund tyee, 4.3lx merc. i was told today by a merc dealer mech., that he doesn't replace the anti siphon vave, he just punches it out of the fitting and run s without one. is this normal? in didn't think it would be good for the electric fuel pump?he also said something abouty...
  9. B

    what fuel filter do i need?

    trying to locate afuel filter for my mercruiser, but nobody around here knows the number i need. the old one has no numbers left on it. it is the spin on cartridge type, looks exactly like an auto oil filter. my engine is a '96 4.3lx, serial number 0F294871. thanks.
  10. B

    mcm 4.3lx hesitation when hard on the throttle

    so my '96 lund, with a 4.3lx, 4 bbl carter, has a bad hesitation when i hit the throttle. if i bring it up slow and smooth, it is fine, but when i crack it wide open from idle, it seems like i'm killing the ignition. 1. it's not the shift cable. it's new, and this happens with the throttle cable...
  11. B

    e-z lift anchor lift clips?

    trying to ;ocate a source for one of these clips, have been told they come from down under. i have searched the net and found people talking about them on forums, but can't find any websites that list them. anybody know where i can get one?
  12. B

    trailer post moved?

    so my shorelandr trailer bow post has moved farther up the trailer. I'm guessing about 3-4 inches, maybe more. it is a single axle roller trailer hauling a lund tyee 1850. about how much of the boat do i want hanging off the back set of rollers? or is it all about tongue weight? right now i'd...
  13. B

    length of oil dipstick, 4.3lx

    can somebody measure thier dipstick on a 4.3 for me please? i have a 96 4.3lx merc, and when i changed the motor, the dipstick was broken off right at the full mark. looking to get another made( just going to cut an auto and drill holes for add and full), but how long is it supposed to be? mine...
  14. B

    boat feels very heavy, seems to be getting heavier.

    boat is a 96 lund tyee 1850. Previous owner replaced floor board under drivers seat. have not really looked at it yet, but after reading a bunch of posts, was wondering if this boat would have foam under the floor. the boat doesn't appear to leak a drop, but cover is ripped and i'm sure water...
  15. B

    parts for commander 3000 controls?

    any body know where i can get parts for a commander 3000 control unit?
  16. B

    shift cut-out needs adjusting

    '96 4.3lx merc., alpha one gen two. no serial numbers right now. i believe my shift cut-out switch is in need of adjustment as it seems to be tripping when i hit the throttle any more than softly. i have a new lower shift cable already, although i will be looking at it very closely. anyway, myu...
  17. B

    cracked manifold?

    helping out a buddy today,(huszmann), who was getting water in his oil. somebody else winterized the boat, well before freezing, and i know for a fact that the four drain plugs were removed. two from the block, and one from each exhaust manifold. i know, because i saw them laying on the bottom...
  18. B

    approx value of 06 nitro 189 with 06 merc 150?

    as title says, looking for value of very clean boat with low hours, freshwater use. also any problems or opinions with this boat. thanks
  19. B

    using small hub proop on mercruiser

    what happens if someone used a prop for a smaller outboard with a 4" gearcase on a mrecruiser alpha one? the splines appear to fit corredctly, but there is a difference in diameter where it meets the gearcase. does this cause any propblems? what about having a prop with a smaller diameter blade...
  20. B

    what oil for sx outdrive?

    i,ve always run 90w gear oil in my mercruiser, but my buddy says the dealer told him he needed to run synthetic in his volvo. i believe it is a 2000 sx drive. are they full of *&^%, or is there some reason for this?
Top