Search results

  1. tg3690

    1998 Force 120 Stalls out in Low Gear

    It is a thermoswitch, not a temp sender.....when the engine reaches a certain temp the switch activates and turns on the warning buzzer.....the engine will not shut off automatically....YOU have to shut it off when you hear the buzzer. #18 in the diagram.....
  2. tg3690

    1998 Force 120 Stalls out in Low Gear

    ebay Canada has the Fram.....they also have the Fram knockoff brand GKI.....Have been using the GKI for a while, no problems.....you can get multi packs of them pretty cheap.
  3. tg3690

    1990 force 125 shift bellow leak

    Franz in Grandview.....should be open now.
  4. tg3690

    1990 force 125 shift bellow

    https://forums.iboats.com/threads/force-125-1986-hole-in-front-of-lower-unit-weeping-oil.750996/ You could take a look at this thread, is about the same problem you are having with the bellows......post#34 talks about a solution by Franz Marine that fixes the problem....assuming he still does...
  5. tg3690

    1998 Force 120 Stalls out in Low Gear

    Something like this Fram G2 works well.....they make different ones for different fuel hose sizes.....the clear one you ordered will probably be ok...you don't really need an expensive filter as it is mainly for visually seeing the fuel flowing, not so much for filtering.
  6. tg3690

    1998 Force 120 Stalls out in Low Gear

    No.....is not a gasket. The one for mine looks like this.....I believe the one for yours is more square shaped, but works the same way.....
  7. tg3690

    2005 Yamaha F225 TXRD rubber grommet replacement

    I would do as 99yam40 said.....the grommet protects those wires from chafing and shorting out on the metal cowling....find a way to disconnect them and run them through the new grommet. No need to put silicone all over it and make a mess.....
  8. tg3690

    Chrysler 55 one cylinder occasionally fires

    On the shoulder of the highway with a flat tire is not a good time to find out that your lug nuts were over torqued with an impact......whenever I get new tires the first thing I do is break em all loose, then retorque to proper spec. If you had a 4-way you might have a chance.....but if all you...
  9. tg3690

    Taking apart command 2000 remote control

    Crowley and boats.net have these exploded diagrams for the 16900 Series.....not sure if that is your exact model......FYI.
  10. tg3690

    1997 Force 90hp Stiff steering

    Another thing to think about....if you decided to repair it, all the bolts/fasteners might be solidified.....snapping bolts off right and left....saltwater takes a toll on them for sure, especially after 26 years.....
  11. tg3690

    IR Laser Thermometer

    I do the same with volt meters, other small battery powered devices that I don't use all the time....
  12. tg3690

    Force 85 HP tilt/trim model no.

    Glad you found it....the suspense was killin me! :ROFLMAO:
  13. tg3690

    1997 90 hp service manual

    The way I look at it, $67.50 is less than one hour of labor at your local shop.....assuming they would even look at an old Force......
  14. tg3690

    1997 Force 90hp Stiff steering

    Is this a salty motor? https://forums.iboats.com/threads/1997-75hp-force.652857/ This link describes the kingpin removal/replacement.....post#4 by Frank A. is real good.....you can do a search and find a lot of threads about this.....see what others had to do, etc.....
  15. tg3690

    Force 85 HP tilt/trim model no.

    Good job Hustler.....hope you find that cap. (y)
  16. tg3690

    IR Laser Thermometer

    Went to HF on Monday to look at that one, were sold out.....thanks for the review!
  17. tg3690

    Yamaha 40 hp 2 stroke tach hookup

    .......
  18. tg3690

    IR Laser Thermometer

    Thanks....saw that one at HD. Milwaukee makes good stuff.....
  19. tg3690

    IR Laser Thermometer

    Posted this in the Non Boating Technical Topics and got no response......Need to get one of these. There are so many and the reviews are all over the place.....so if you have one and like it could you give me the brand and model #? I would trust real experience from yall rather than reviews on...
  20. tg3690

    Force 50-oeo62441 runs rich

    https://forums.iboats.com/threads/synchronizing-carbs-and-timing-on-a-75-150-chrysler-or-early-force.420505/ This link is in the stickies at the top.....step #8 tells how to adjust the idle mixture screw....good info. If you do a hole shot and the engine accelerates smoothly without...
Top