Search results

  1. T

    1987 Power Play XLT-185 - floors, stringers, and upholstery

    Got lots of things done today including installing the windshield. I'm still not happy with how the paint came out, but I'm going to deal with it for a season. I'm thinking I'll remove the windshield next winter, pull the glass, and have the frames powder coated. Some of the small things I...
  2. T

    Alpha One Gen 1 transom repair kit - where do all the o-rings go?

    Drive serial number 0B612075 Transom assembly serial number 0B667146 I've got an Alpha One Gen 1 on the boat I'm almost done restoring - hoping to splash this coming weekend. I pulled it apart a little over a year ago, rebuilt the transom assembly (using the Mercruiser kit PN 30-803097T) about...
  3. T

    Mercruiser MAG 350 MPI 2005 -No compression on one cylinder

    Yes, do a leak down test to determine where the compression is being lost to.
  4. T

    1987 Power Play XLT-185 - floors, stringers, and upholstery

    OK, @Scott Danforth , you win. I've got a crew coming up Friday morning and we are going to try to splash on Sunday November 28.
  5. T

    1996 Century Boats 1800 Center Console Refit and Modernization

    If I end up hating my carpet, I think I may pull it up and do an EVA foam floor one winter. What's replacing EVA like? I'm assuming it comes up in tiny shreds and you end up having to sand most of it and the adhesive off...
  6. T

    2021 Splash of the Year Nominations

    I'm feeling the pressure...
  7. T

    1977 Glastron 175hp 175hpv “Free Boat” project

    Take a few weeks off from stressing over what to do with the boat and watch all of Frisco Boater's videos on his SeaRay restoration, then watch JMink's videos on his Glastron restoration, then watch a bunch of Boatworks Today's videos. Then decide if hull restoration is something you want to do...
  8. T

    1987 Power Play XLT-185 - floors, stringers, and upholstery

    Are you talking about using an etch primer, or something like Alumiprep 33 (or both) prior to paint?
  9. T

    1987 Power Play XLT-185 - floors, stringers, and upholstery

    Thanks for sharing. I honestly think I'm going to paint it still, but we'll see once I get the other frames stripped!
  10. T

    1987 Power Play XLT-185 - floors, stringers, and upholstery

    Nope, but I didn't take it down to bare metal originally either...just scuffed up the paint that was already there, so I don't think lack of etch would cause the paint to not cure...maybe not adhere, but it should have still cured.
  11. T

    1987 Power Play XLT-185 - floors, stringers, and upholstery

    Well, it was either bad prep or bad paint because it was still wet in spots after 10 hours. I'm going to blame the paint. So I stripped the paint off. Now I'm curious how it will look with a raw aluminum frame on the boat, so I'm going to strip all the frames and set it on there to see. I...
  12. T

    1987 Power Play XLT-185 - floors, stringers, and upholstery

    The paint was all scratched up on the windshield frames, so I'm sanding and repainting. Hoping to reinstall the windshield next week sometime.
  13. T

    2021 Splash of the Year Nominations

    How could I forget about @Meames1 https://forums.iboats.com/threads/restoring-a-1990-larson.741569/
  14. T

    1987 Power Play XLT-185 - floors, stringers, and upholstery

    I gave it an honest look last night and I just don't think I'll be ready by 12/1. I'm going to try to splash 12/5 if the weather behaves and I can get the last few things done needed before putting it in the water for the first time. There will still be work to do after splashing before it's...
  15. T

    2021 Splash of the Year Nominations

    😂 not impossible, but that would be pushing it. I do have all of next week off work... 🤔
  16. T

    Bad 1970 Mercruiser Engine, Please tell me there is still hope.

    You can do it. Take a few weeks and watch all of the Frisco Boater videos on YouTube for the Sea Ray restoration he did, and if you want more, watch some of the Boatworks Today videos and JMink's videos on his Glastron restoration as well. I've always been mechanically inclined but fiberglass...
  17. T

    1987 Power Play XLT-185 - floors, stringers, and upholstery

    Fired the engine today for the first time since putting the boat back together (over a year). I did not have the drive installed, so no cooling water, but I only ran it for about 15 seconds. Good oil pressure, but it doesn't want to idle unless the throttle is cracked, and the starter isn't...
  18. T

    1987 Power Play XLT-185 - floors, stringers, and upholstery

    Looks like Dap does make it in an aerosol can: https://www.dap.com/products-projects/product-categories/adhesives/contact-cement/weldwood-high-streng/
  19. T

    1987 Power Play XLT-185 - floors, stringers, and upholstery

    Thanks zool, I'm sure we'll scuff up the white vinyl really quick, lol. I used DAP spray grade Weldwood (aka landau top & trim contact adhesive). I spray it out of an HVLP gun with a 1.8mm tip. I use 3M PPS, so cleanup is really simple on the gun.
  20. T

    1987 Power Play XLT-185 - floors, stringers, and upholstery

    More progress today - I got the last of the carpet installed which meant I was able to also install the captain's chair bases, glove box, and ski locker trim ring. Back of the carpet after rough cutting to shape. I used a silver sharpie to transfer the template from the plastic to the carpet...
Top