Search results

Sew in some heat tape

could always pull the motors and store them inside.

The Noco comes with instructions

There are only 8 marine starters for GM bases motors 153 tooth flywheel (inline bolt pattern) or 168 tooth flywheel (straight across pattern) a direct drive or a PMGR. Then you have I/O vs Inboard (starter rotation) Head to NAPA , bring your old starter and buy a marine replacement. Most...

Jeff Foxworthy has a bit on glitter bass boats

You have an oil pan and dipstick on your current busted motor. Use them

Barr is the casting house that makes Edelbrock, PCM, Volvo Penta and Mercruiser intake and exhaust casting

you have to take teh drive off to align it. so why fight removing the motor by leaving the drive on.

remember, the drive comes off before the motor comes out.

aluminum is easy to weld if you know what you are doing. the pontoon logs are 5052 aluminum, so you would not want to use any of the 6061 or 6063 extruded shapes. for a 12" long, 1/2" wide gash, the type of repair would depend on how jagged the gash is. if it can be straightened, then a...

GM and ford are not any better. most of the airbag sensors (required) on 17+ year old GM vehicles are NLA. so if your sensor dies, you no longer have airbags unless you want to chance one of the aftermarket sensors.

yes, the fluid needs changing about every 5 years the slide pads wear and the shock may or may not be working as they only last a few years if the MC in the coupler is bad, you can replace them.

V6s crack internally and externally, you can't save them with jb weld If you get a motor from a truck, you need to swap head gaskets to marine and core plugs to brass (note, some automotive engines have stainless core plugs) Plenty of base Silverados out there with V6s Check car-part.com

Oooh another oil thread

Was caught in rain on the ICW just outside Tampa Bay and Eggmont Key. GPS was useless as we were not able to go fast enough for it to get a reading. Apparently we went round and round in circles until the rain cleared. Installed the compass shortly after

Doing the crown molding in the house, my old Delta nailer went phhlllbbtttt, so I ended up with a Metabo from Amazon or Lowe's the quality is okish but I pull the trigger and a nail comes out I think these are all now built as "throw away"

https://www.ebay.com/itm/127609150791

My buds sign

My front yard sign

AD, wait until that bigggggggg screen in the dash takes a dump