Search results

I hope he knows what he is doing......he is mercruiser certified here in Greece and this is all I know.... When he scans the boats ecu's all are green online and have the last update. G3 sais that they have the latest firmware. When he swap the tvm cylinders, he just plugged the port actuator...

No no....the bottle was full of fluid.... Something electrical is going to make me crazy.... I am begging for a tvm gen1 wiring diagram.......

I am coming back after a lot of try to make axius work on my boat.... Last summer I used it with the classic steering cable. My mechanic can not make it work after all tries he made. The starboard engine is fine with the axius and the steering actuator works fine after calibration, vessel...

Hello. I recently bought a used cobalt 303 with dual 377Mags Axius DTS. The boat runs fine except i have a problem (different thread) with the axius ... But i have another issue. The trim does not work above 3000rpm's. Nor up or down. At 2990rpm works fine, but at 3000rpm nothing. Something cuts...

Yes, I made this post when I bought this boat. I have put every axius component (found tvm actuators etc) back in place and now I stucked to the calibration of the system which need the personality file. ....I hope tomorrow to have some good news from Cobalt......

I reached Cobalt and that is what they told. " We installed the boat personality on this 303, but we got it from Mercruiser. We no longer have it here, but you might check with Mercruiser to see if they can pull this one up and get it to you." I sent them email again asking to contact mercruiser...

Thank you ve I have already contacted Cobalt for the personality file and they told me that Mercruiser gave it to them and they do not have it now. They suggested me to contact directly Mercruiser. But I told them that Mercury will not give something unless the boat manufacturer ask for it. Now...

Thank you very much.....I will try!!!!

Sorry but my English are a little poor....what do you mean "can you come to the front office"???

Hello, i recently bought a used Cobalt 303 with 2010 axius Gen1 system. The boat had problem and previous owner unistalled the axius components (actuators from both engines and steering pump, HP filters etc from starboard engine) and converted it to classic cable steering system with a tie bar...

The TVM (item 18) is not currently installed. They took it off with the actuators. Besides, I think that it comes with the actuator installed.... The actuator I found from 496, has the TVM on the back with the bracket. So, I think as they are rare, I will buy it and I hope to find a starboard...

For example...I found the part: 8M2016466 (8M057416 new), port axius gen1 actuator, from 496 H.O. Is it compatible to 377mag??

I found an axius GEN 1 actuator cylinder of 496. Is it compatible to 377? I think that TVM are irelative to the engines...there is only GEN1 &2 for gasoline and diesel applications....am I correct??

Well.....I checked what is inside the boat... Firstly I was wrong concerning the engines serials. The real are: 1A605669 and 1A605670. The 1A437598 is the transom serial of the 1st engine.... Both pcm555 are labelled as " 6.2 Bravo DTS Axius HPR" 8M2015889 & 8M0031299. The port engine has the...

I will go to the boat and check which parts are still remain.....I hope harness and axius ecu and sensors are there...

The serial of the engines are: 1A605670 and 1A437598. For now, i know that the joystick, skyhook panel are placed in dash, and they are connected to power.....i mean that when i start the engines, skyhook panel leds are RED and when i push buttons, there is a beep coming from the engine...

Hello from Greece. I just bought a used 2010 Cobalt 303 with 2x377mags axius. The boat is in very good condition and engines-drives as well but I have a problem. The boat was equipped with vesselview,axius system and skyhook. But something happened and previous owner bypassed axius and changed...

Hello. I just want to ask if the diacom scan tool can make the fuel injector balance test when the engine is equipped with the ECM 555. My engine is a 350 Mag mpi (2009) which is semi batched fired. This means that it triggers the injectors per pairs. (2 injectors at a time). It would be useful...

Hello... I have a repowered Wellcraft 202 nova spyder with a 350mag mpi (MY 2009) with 1.47:1 Ratio alpha GENII drive. The performance of the boat using current prop (enertia 18p) is very good reaching 58mph@gps and 5100rpm and having very good economy , 3,7mpg@3000rpm. But yesterday thieves...

I changed exhaust manifolds and risers to my engine 350 mag mpi (2010 sn:1A348183). After about 40 hours a hissing noise from the one side appeard. Finally yesterday during idle I put my hand near the manifold close to spark plugs and I felt obvious exhaust gas to my hand. So I am sure that the...