Search results

Seems odd it blows off in my driveway and not while I was honking on it wide open

I will drop it to 12

The one that I suspected was a 13 when it first blew hose

Yes it does...and there is a hole in thermostat located at the top....it's never done this before

After I installed new intake and carb I took boat out and she ran beautifully...not a single issue....next day I was running it on muffs and one of the hoses coming from thermostat housing blew off...no rhyme or reason. Temp was same as always. I suspected maybe rad cap....I changed it for a 16...

Posting for a friend who has purchased boat and need to know what engine type is best suited. Thanks

Its all in and runs amazing. Thanks for all the help

Yes it has a pcv in the valve cover

My carb doesn't have a spacer plate...also no port on flame arrestor

Curious if this is correct. The one with hose goes to my vaccume gauge...other port for pcv

Here's pictures...first are the ones I got with the order...second ones I bought today

I put one on head to see...no good

Finally got the intake...edelbrock 2121...I also ordered the intake gaskets and the ones sent look odd...7220. Any input

I understand that...post 7 is what I have found..from pertronix

There is no ballast resistor..never has been. No points either.

The white goes to choke..and jumper to coil positive

Ya it's making my head hurt as well. I hate wiring

Sorry...and a wire going from positive side . coil to the choke

Sorry I'll try again. The wires to my coil positive side are. One to the choke and one to the I terminal off solinoid and the red from distributer. The negative side has the black from distributer and a brown wire that I believe goes into the wiring harness