Search results

It's the dam exciter wire from alternator that I just had repaired...he put new regulator and fixed that wire...I took it off...all work great

Coil

Here's pictures...I removed black wire...still doesn't shut off

Sorry I realize I sent 2 different ones. It has always been one wire to the starter. That second one is not hooked up to anything i hooked it to soliniod when I was trying to figure out the double shut off. I will send pictures right away as to how it is

I don't have points I have a pertronix igniter 2 marine 302 distributor and the 0.6 ohm coil that is for this system

The difference is just that black wire that runs 2 gauge lights. I hooked it to the I terminal

Sorry I can't seem to get the vidio to load

Again today...will not shut off with key. I changed ignition switch...didn't help...here's what's going on voltage wise.its like this at coil positive and soliniod I terminal

I have a .6 ohm flame thrower canister type coil. My question is does it need to be grounded to engine by way of the bracket. My boat never had a bracket when I bought it but I know there is one for these coils

Thank you..now that makes sense

Such a frustrating situation I appreciate all the help

Bit the old is the one that started this whole ordeal...or could have been

Here's the thing...I hooked old soliniod back up and wires the way they have been since I bought the boat...fired up...runs smooth...and shuts off with the key

Pulled the wire that comes from 40 amp breaker to batt

Well I appreciate your efforts for sure. Electrical baffles me so I apologize for being a block head lol

What does...not being flipped mean

Alright so then if that's all normal why will it not shut off with green attached...

Alright...fired boat up...pulled green wire and it stayed running....I shut it down and left green wire off...boat starts and shuts off with key without I terminal hooked up...the voltage at coil positive is sporadic jumping around. Now I'm really confused

I will check all these...it worked fine for about 4 starts and was shutting off normal with key....and then the next time I tried...no off..

I removed the green and no power at wire...power at post...there's a little spark everytime I touch the terminal as well