Search results

  1. flyingscott

    96 johnson 20hp temp switch

    I do not believe that has a temp switch or failsafe. I would do a compression test before anything
  2. flyingscott

    First tiller motor

    That hose is not right should be about a 1/4" Id at most. To fix the fuel pump buy the complete carb kit that has the primer also
  3. flyingscott

    2001 Mercury 25hp POWERHEAD

    Rebuild it yourself. The kits and the manual are available. The hard part might be finding a shop that can do a blind Mercosil Bore.
  4. flyingscott

    35 hp johnson one cylinder no compression

    Except for the fact both Fire rings would have to be blown, and one cylinder has compression so Not so sure its a split head gasket.
  5. flyingscott

    Source of Oil Leak

    My bad did not read your comment all the way. Brain fart on my part you are correct
  6. flyingscott

    Source of Oil Leak

    You cannot run out the bottom carbs on that motor ,unless you are above 1800 rpm Make sure the airbox gasket is in good condition and the hose is connected to the crankcase
  7. flyingscott

    1983 evinrude 9.9 2 stroke idle speed setting

    Make sure the snap ring is on tight and the knob is not pushing out. You may need to modify the adjuster I have never seen one that actually worked correctly. leeroysramblings.com has a lot of good info on those.
  8. flyingscott

    cold start issue

    Is this a looper or a crossflow? V6 or V4? Is this another Vr0 pump or a standard pump? If it is a standard was the pulse limiter removed?
  9. flyingscott

    2000 Johnson 200 runs reverse( fly wheel spinning backwards) HELP , ITS CURSED!!

    Put up Video of this. Does your motor have the OIS ignition?
  10. flyingscott

    1980 johnson 9.9 bogs down when trying to go to full throttle.

    What happens when you pump th primer ball on the fuel line? Primer ball on correctly arrow facing motor? Try opening the low speed screw another 1/4 turn open.
  11. flyingscott

    69 Johnson 25

    Try a different prop
  12. flyingscott

    Oil Injection Kit?

    Yeah that was a good system. Don't ever use one of those they were terrible.
  13. flyingscott

    Idle adjustment knob

    It is not an idle knob it is a throttle lock to set a speed for trolling. Clearly stated in owners manuals from OMC.
  14. flyingscott

    Oil Injection Kit?

    No there is not.
  15. flyingscott

    Crack in lower unit just in front of prop 25hp Mercury OB

    that has to be welded if it can be
  16. flyingscott

    1985 Johnson 120 Goes WOT then falls on face

    Check for spark when that happens.
  17. flyingscott

    Power pack difference

    They are not different manufacturers. 583773 is NLA and has been superseded by 584028. So you are getting the correct part #.
  18. flyingscott

    1985 Johnson 120 Goes WOT then falls on face

    Put it up on youtube and put the link here
  19. flyingscott

    1985 Johnson 120 Goes WOT then falls on face

    What happens when you pump the primer ball on the fuel line?
  20. flyingscott

    Bottom cylinder won’t fire but still has spark

    I believe that is an xblock looper. That means the portside cylinders use the starboard carbs and vice versa. I believe, if not somebody will be along to contradict me.
Top