Search results

will expand upon all the other reasons above once upon a time, SAE 30 was the oil that was mixed with gasoline for 2-cycle motors. high ash content and expanded use meant that the exhaust fumes needed to be cleaned up. the oil slowly evolved to todays synthetic the poor mixing practices of...

both truck motors and boat motors came from the tonawanda ny engine plant both truck motors and boat motors were built with the same block, heads, cranks, rods, pistons, valves, etc. boat motors get brass or stainless core plugs boat motors get a marine cam (no overlap) boat motors get a...

last time my motor stalled, I buried the outdrive in the muck so deep it took me 3 hours to clean out the cooling system after being towed home.

first, that is the firing order second, you need to know where cylinder #1 is. if you need to restab the dizzy, now is your time pull the plugs, put your finger over cylinder #2, when you turn the motor over and you get a PFFFFFTTTTT vs a pfft, stop. then slowly bump the starter until the...

Here is something to consider. out of the dozen boats or so that I have rewired, once you jump in, its usually about $100 to go thru the existing wiring and take care of the actual issues vs the $4-600 it would cost you to rewire the whole boat. (or more if you buy the engine harness vs making...

Probably either a lean rattle, or hydro locking from water

Manual can be bought from Brunswick

Pull your plugs. If one is really clean or has water on it, you have an issue and should pull the motor

The fire goes out after the boat burns to the waterline

Call them

No Yes You will need to buy what you can that matches the motor/control wiring. From there you will buy a bunch of primary wires, connectors, etc

There is the mandatory requirements from the coast guard. Start there Add VHF radio, cell phone and tow insurance . Those are the must haves

Did you use new manifolds ? What took out the old motor?

Should have read the manual on winterizing

Make sure you guys look at the octane rating system called out in the requirements. RON vs MON vs R+M/2

Visit your local dealer, buy some parts and they may let you look at their copy

Most likely bad connection at batteries

so with the 40# difference that means you and your cousin are 118# each? I was 10 weighed 118#

look in the fiberglassics library. however depending where you are, without proper paperwork is is just a yard planter additionally, if your intent is to use it again, all the wood coring will need to be redone in addition to dealing with the gel coat issues. once you understand the cost of...

there is one on ebay for $15