Search results

youre still under warranty, go to another stingray dealer

Two pieces of 3/4" laminated together.

You cant quit

Transom specs are 2.0 to 2.25

Clear the corrosion from the wire going from the coil + to thw starter R terminal. Service the points (clean them - they corrode from sitting)

Say it twice

its simple physics a skier will put a maximum of 400# of force on what ever a ski rope is attached to. that is the maximum strength that someone can exert holding onto the rope before the ski handle is pulled from the hands. so if a skier dumps and hits the water and holds on, the rope is...

Hey Newbies......read the rules.......... no posting in 13 year old threads.

no, never gonna

stop looking at the OEM's with their markup. pump. https://marinepumpdirect.com/johnson-pump-10-24946-01-replaces-10-24930-01-10-24915-01-10-24232-01-and-others/ anti-rotation bracket...

yes it is

been there too

if you dont want to use the crank socket to turn the motor (requires removing the damper) you can get one of these...

wrong. you are so wrong on this. the chevrolet based engines only have a 5/8" bolt in the soft cast iron. the threads in the crank will strip out every time before the bolt breaks. the bolt torque limit for the plain bolt (non plated, grade 8) is at about 200 ft-lbs, the rating on the crank...

get a factory manual straight from Brunswick

silicone has no place on a boat. trim tabs should be sealed with 3M 4000 UV or 5200 agreed, take it to the dealer, document the issue, get it fixed right.

stubbed my toe

I gotta pee

Look up parker oildyne 108 reservoir. They are about $20. Same onea that mercruiser sells. Can also hit up your local parker hydraulics store

your drive is above the limit of the trim and you are getting into the Tilt range you are pulling up on the 2ndary switch to allow the drive to go up further, correct? trim is the thumb switch, the 2ndary switch is the one under the fingers the other posible issue, if you hear the pump and...