Search results

i would drill out the other emulsion tube with the additional holes.

your non-balance shaft motor has a broken crank you need a new motor why not build a balance shaft, vortec.

in some boats, yes in some boats no

hydro-mechanical

I did riv-nuts and had to cut 8 of the 15 out when i was simply test-fitting the bolsters.

buy new mounts vs old ones. if you upgrade to a balance shaft motor, you dont need the squishy mounts and can use the cheep mounts

the problem with threaded inserts is they are the same material as the screws..... which means they gall. BTDT own a pile of galled hardware just from the Salt Shaker restoration.

Floors are the last thing to rot. Stri gers and transom are the first. You have a full gut-n-rehab project

you can epoxy fill the holes or you can embed aluminum backing plates in the floor and drill and tap

if the drive is white - hydro-mechanical if the drive is silver - pure mechanical

depends on how the unit is bedded to the boat. my boat, everything was bedded with butyl tape and the seams caulked. it lasted 31 years prior to tear down

pull the whole door assembly service any seals by replacing them with original re-bed the door assembly with butyl tape and UV4000

What I did on the Rogue. 2 rolls of 40 grit and a DA. Then 2 rolls of 80 grit. Then sprayed gel. What my budy did every year on his sailboat. 40 grit on a 8" grinder. A fast pull and grind. Use VE putty to fix divits. Use 80 grit in the DA to smoot the hull 2 coats of barrior coat, 4...

Or order a new set of heads for $850 and ship from the US (about $125)

many of us add electronics or increase the number of beer coolers.

no, there isnt any indicator. just check over everything only reason I mention it....co-worker had newly rebuilt 2005 60hp 2-stroke (new power head and new lower unit) linkage popped off sometime in the last two outings....... motor started making lots of noise this past weekend (sounds like...

first, welcome aboard second, you should have bought the boat you want. however as dingbat stated, your worried about nothing

are you just looking for letters? https://www.amazon.com/s?k=boat+lettering&crid=13I48KKPKM5GK&sprefix=boat+le%2Caps%2C210&ref=nb_sb_ss_ts-a-p_1_7 or are you looking for a custom decal? (your local sign shop)

if its 2-stroke...... good up until the little linkage on the throttle that actuates the oil pump comes off..... as Racerone indicated. a 16 year old boat motor is only as good as the care and maintenance it has received

if it rusts........ it will keep an edge kind of partial to tru-hone sharpeners. https://www.truhone.com/store/pc/viewPrd.asp?idproduct=1 mainly because we make the parts for it at work.