Search results

  1. S

    mariner 9.9 4 stroke runs on choke but not without

    Ok, so here is the deal. I am pretty good with engines, but this one has given me the same problem that I can not fix. This is a 2007 mariner 9.9 4 stroke. It will run while the choke is on, and the rpms are up. If you take the choke off then it dies right away. If the engine is cold, 8 hours or...
  2. S

    Need information on2007 21SS trailer specs

    I have a 2007 21SS and I need a trailer. Well I have a trailer but it does not fit right... Here is what I need to know can anyone tell me how many bunks are on there trailer how far apart they are and what angle the bunks are at? Also how high are they. This is a Heritage and they make...
  3. S

    Spark Plug wires and Threads

    Do the spark plug wires thread into the distributor? I was looking at a coil and yoke assembly on-line and it looked like it threaded in underneath the distributor/flywheel. I have never seen that before and I feel like that is a pretty stupid question to be asking? 1970 115hp JOhnson 115esl70d
  4. S

    Couple troubleshooting problems, could use some help.

    This weekend I tried to get the old motor started with no luck. So I did a couple things to see what was going on and ran into another issue that may be a little more serious. Motor: 1970 115hp Johnosn. 115esl70D First I don't get any spark at any cylinder, I'm going to pulling off the...
  5. S

    Need asst Hooking up my motor.

    So I bought a boat that did not have a motor, this is a project boat and I have never hooked up a motor before nor have I been around enough boats to see what parts are needed to hook them up. So I need to know if there is anything that I need to purchase to hook up my motor and how do I do it...
  6. S

    DCPD blend and VE/ISO/Ortho blend resins.

    I recently ran out of resin, and being land locked I have done numerous searches and looking for providers of resin for a reasonable price. I have failed for the most part, however, I think I may have found someone to help me. However I do believe this resin is different then the resin I have...
  7. S

    PB Recipes

    I am looking for different ways to make My PB for my current restoration. I have read a couple places on what they use just curious what others are using. I am looking for a cost effective method but strong. What do you have?
  8. S

    How to build a Custom Windshield?

    I want to make a windshield for my boat but did not know if it is possible to do. I don't care what kinda material it is I just want it to look more modern. Has anyone done this before. Or are you just fitting a Sheild from another boat on your current one. It currently has a walk through, I...
  9. S

    Did I post it for to low

    I posted my 1997 Heritage tandem axler up for sale for $2000. And guys says hes on his way over to pick it up. I posted it less then 30 mins ago.
  10. S

    Where to get trailer value.

    I have a 1997 Heritage tandem axle. I believe it is a 29' foot trailer and gawr is 6000lbs. It currently holds my 18ft bass boat. A little overkill I think but I bought the boat with the trailer, or I guess in this case the trailer and it came with a boat. Anyone can help me out, as my boat is...
  11. S

    Mystery Motor Good news and Bad News

    Well I have this 1970 Johnson 115hp motor that I got for my ps3. I thought that was a steal even if it did not run came with boat controls also. So tonight I thought I got all the wires reconnected so I decided to check the compression. Here part of the news 158 158 162 158 I was estatic...
  12. S

    "Master Bait'R" Restore Thread

    Ok, this is a 1990 ProCraft fish and ski. Im not sure of the first step so I am looking for recommendations. Keep in mind this will be my first restore. I am going to post pics from the ski compartment and transom area. I believe the transom to be 100% solid. I think even the stringers are...
  13. S

    How to do jumper for 1970 Johnson

    I am going to do a compression check on the engine tonight and I am not sure how to do a jumper to start the motor. I know it needs to connect to the battery but where do I put that wire since it already has a power wire running from the starter solenoid to the battery? Sorry for such the newb...
  14. S

    Johnson/evinrude ignition key

    On my ignition it says "KF56" I did a search and came up with only 1 key, does anyone know if this is correct. I do not have a dealer anywhere around so I will not be able to go and test out the keys.
  15. S

    Johnson/evinrude ignition key

    On my ignition it says "KF56" I did a search and came up with only 1 key, does anyone know if this is correct. I do not have a dealer anywhere around so I will not be able to go and test out the keys.
  16. S

    Motor Wiring Help w/pics 1970 Johnson 115hp

    I posted this in the Motor specific section and did not get much help hoping that someone can help me better here. A little back story so you know where I am coming from. I am new to Boats I am a car guy and wanted to try a boat. I boat a 1990 procraft with no motor or controls. I found a...
  17. S

    Starter Not hooked UP, need some help. Pics

    So after looking at the motor, I saw that the starter has no wires hooked up to it. I have looked for wiring Diagrams for My specfic motor but the closest that I could find is a 1969 115 Johnson. This is a 1970 115hp Johnson model # is 115esl70d I am not sure what the "D" stands for but when...
  18. S

    How serious is my problem. Pics

    I have one spot in my floor that is not solid. It is where I think a seat used to be Not sure. Does every boat have a Cap? I know stupid Newbie question. It looks like under neath that it just does not have enough bracing. But I am new to all of this so I could be wrong. Then it looks...
  19. S

    Small holes in the Hull, how to fix? Pics!

    Ok so I was looking around the hull today and found some small holes and one that was a little bigger then the rest. Hole is not really the right word but not sure. Anyways would like to try to get this boat on the water quickly so I am looking to get this fixed right away. This is the...
  20. S

    What Lower Unit Oil, 1970 Johnson 115 Electric shift unit

    So what type of lube/oil do I get to refill it, and does it have to be from a specialized store? Also what gap should my spark plugs be at? I have tried to find a manual but they all have to be bought.
Top