Search results

  1. ESGWheel

    4.3 efi tbi throttle question

    Does this prop have a center hub that can ‘let go’? (Shaft spins but prop less so). While I would expect to rapidly deteriorate, check to see if you have a spun hub. If not and given the motor is still stong, only other factors that come to mind are weight or drag. Weight due to water intrusion...
  2. ESGWheel

    Mercruiser 120 poor starting

    You’re welcome and before we get going, I am glad you are taking advantage of this forum. There are a lot of great contributors here that are willing to help. The key is your feedback and not giving up :) Frankly your issue is, IMO, a simple one > a lack of fuel delivery. More: there are...
  3. ESGWheel

    Mercruiser 120 poor starting

    Guffer, if I may, I am going to suggest a different approach but will address a possible ‘cleaning’ method at the end for your pickup tube. As you are aware, troubleshooting is a process of elimination. If not this, then go after that based on a logical sequence and tests along the way. While I...
  4. ESGWheel

    Carb rebuild question

    Scott, Nice listing :) However, I could not find the OPs in the listing nor on the Holley website which is also full of great info! @nitrosteve: The first PN 3885133 is the OEM’s part no. and not referenced in the Holley data. The 2nd number should be the Holley list no. but I cannot find it...
  5. ESGWheel

    Prop Question... Bayliner BR185

    Concur with Scott > go to a 4 bladed. I had a similar use / profile as you when bought the new to me boat (Larson 228 LXi) some years ago. Came with a 3 bladed but no hole shot & sluggish to plane out and WOT was shy of spec at abt 4800 vs 5000 (two people). Talked to the local marina and they...
  6. ESGWheel

    Piston Rings don´t fit, too little clearance, sits too tight

    For my benefit here is a recap of your situation > it helps me think thru things :) Doing a rebuild on engine > only honing cylinders, not bored Intending to reuse ‘old’ pistons but with all new rings had back-clearance issue on Oil scrapper Thus, decided to go with New Pistons that the shop...
  7. ESGWheel

    Carb rebuild question

    Others may have a refence library to assist but also the good folks at Leaders RPM (link) are very helpful and sell OEM stuff. Give them a call, I am sure they can help.
  8. ESGWheel

    Mercruiser 120 poor starting

    Post checking if good compression and spark etc. from above, and still have the 30 sec. run then stall, check this: post stalling, take spark arrester off so can see down the carb throat. Then pump open the throttle fully in a rapid motion while looking down the throat. Should see a stream of...
  9. ESGWheel

    454 MPI seawater impeller

    Being a contortionist at 65+ is challenging! Here is the hose pick set I got some years ago, works great! Link
  10. ESGWheel

    2015 Mercruiser 4.3 EFI issues.

    Cracked heads / block / blown head gasket can also come from overheating. In addition to the above, also suggest to run a basic mechanical evaluation on the motor prior to trying to restart > a compression test. And even prior to that, suggest pulling off the valve covers looking to see if that...
  11. ESGWheel

    swap a microwave for a larger refrigerator

    While true, its clear the OP is not familiar with the electrical side and do not want to give the impression that OP can increase his breaker size without a holistic evaluation and investigation of his installed wiring.....
  12. ESGWheel

    Piston Rings don´t fit, too little clearance, sits too tight

    Yes of course :) But i think the OP's current issue is Side and not Gap clearance....
  13. ESGWheel

    Piston Rings don´t fit, too little clearance, sits too tight

    @bollerwagon It seems that you have had issues with at least two of the types ring clearances thus a suggestion to make sure it’s understood. While you are aware of these critical clearances, I only highlight them here for the clarity of the discussion and for others to understand. Piston Ring...
  14. ESGWheel

    swap a microwave for a larger refrigerator

    This is the right question to ask and need to fully explore and have locked down prior to making any purchase of a new unit. While more then likely the power you have for either the existing m/w or refer will be sufficient for the larger refer, but you have to do your homework on this else risk...
  15. ESGWheel

    HELP!!! Monterey 256 Sport Cruiser 1996

    Thank you for the follow up and the explanation on the cylinder 8. Pulling plug wires one by one is a good and long-standing troubleshooting practice. I am not sure what I was thinking asking you this question > I should have known better, so please excuse my question. And you are probably...
  16. ESGWheel

    HELP!!! Monterey 256 Sport Cruiser 1996

    There are a lot of smart folks on this forum, and I am sure they can help solve this. Let’s see if we can get the conversion started with some of the thoughts I have regarding this frustrating issue. First off, it may be useful to post a short video of the situation. For backfiring: there are...
  17. ESGWheel

    Mercruiser 4.3 starter issue

    No magic but rather a process of elimination. Like the classic Clue game, need to figure out if its Colonel Mustard with the lead pipe or Professor Plum with the rope…. Given the motor turns over by hand, there are two basic potentials either the Starter or the Flywheel. Based on your post it...
  18. ESGWheel

    Engine won’t turn over.

    Thank you for your kind works and this is a 2-way street for me > your perseverance, willingness to post, listen, re-post and keep at it until solved frankly is what keeps me going as well. I am a lifelong believer in giving back, which is the reason I served in the US Navy (retired...
  19. ESGWheel

    Volvo penta 5.0gxi 3869255

    No, reread post #7
  20. ESGWheel

    Boat reverse polarity

    1st be extra cautious and do not use your AC system until this is sorted out. 2nd as mentioned get yourself a device that will test an outlet for reverse polarity, like this link. Since this style is made for typical outlets, and your dock’s power pedestal / boats power cord is probably 30A also...
Top