Search results

  1. R

    Odyssey Battery

    Wow
  2. R

    Automotive Diagnostic Tool

    Any recommendations on what to get? I've got a cheap code reader, but I might like something that'd do more (like one you could drive with it hooked up?). My newest car at the moment is an '05 (Acura, 178k). That's the one that made me think of this; it's got some mild stumbling, mainly...
  3. R

    4.3L horsepower

    Don't know what an '04 has, but my '86/88 Cobra 2bbl's supposed to have about 175HP. The stock prop (spec, at least) is a 14 1/2 x 19 3-blade, and it works great on my 19.5' boat.
  4. R

    Another Winterization Thread!

    4.3L OMC Cobra. Last couple of times I've poured (then forced) the pink stuff down the hose that comes from the back until some comes out the open drains in the outdrive. Reason is that the little screw in the bottom of the PS cooler is Ok to get out, but rather a pain to get back in and the...
  5. R

    Mercruiser 4.3 Prop Question

    Might want to clarify. If I did that the nose'd be pointing at the sky, lol. I must not be understanding. I feed it in gradually until I get just a little bounce and then maybe back off a bit if it seems like it's going to worsen. Throttling back, obviously requires trimming back down some.
  6. R

    Mercruiser 4.3 Prop Question

    Maybe a dumb question, but are you trimming for the speed? That'll get you a few knots. 88 OMC Cobra, 4.3L. 14 1/2 x 19, 3-blade: 45mph all out, at about 4,500rpm. 2bbl carb. Great (hole-shot?) also, btw.
  7. R

    A need to vent moment

    Quite literally, in this case, lol.
  8. R

    Toyota/Lexus Timing Belt Change Thoughts

    Ultima was the first try one.
  9. R

    Toyota/Lexus Timing Belt Change Thoughts

    NEW alternator from NAPA seems to have fixed the electrical problem(!). It read over 14V on initial check, as I would expect. The connector snapped in better than it did on the (chain store...) reman replacement I tried first. That one tested good when I took it back to them, but I got my $...
  10. R

    Toyota/Lexus Timing Belt Change Thoughts

    Yeah I saw the VVT-i and thought, oops, but that's the inline according to that site; this one's a V6 (but says VVT-i on the engine cover). Saw another place or two that agreed with, it's clearance.
  11. R

    Toyota/Lexus Timing Belt Change Thoughts

    Info. above says it's non-interference... This too: https://carbuyingsupport.com/list-of-interference-engines/ (I didn't even know about that before posting here) At any rate... It's down at the moment with an alternator issue? Hadn't had the car 2wks and had to replace it (with a chain...
  12. R

    Toyota/Lexus Timing Belt Change Thoughts

    Don't get me wrong, I wouldn't mind having some records, but for most stuff, it sort of is what it is, as long as I know the drivetrain's original and all that. It's a 2-owner car (sisters); but I'm going by word of mouth there, and the feeling I got about the whole thing. A little risky, yes...
  13. R

    Toyota/Lexus Timing Belt Change Thoughts

    Well, you oversimplified that a bit. As I said, I looked it over pretty thoroughly. And it ran and drove great. Have you looked at cars in the $3-4000 price range lately (including what people want for ones with 200+ or even 300k miles or more [it's crazy])? 153k miles is not a lot for...
  14. R

    Toyota/Lexus Timing Belt Change Thoughts

    That sounds like good news... I'm not worried about a tow bill if it came to that. 60k is what I remember from years ago, but I've not had one personally, until my Acura, that had the belt. I think something was said when we bought it, about my son's '00 Maxima 3.0L too, that it wasn't a...
  15. R

    Toyota/Lexus Timing Belt Change Thoughts

    Just picked up an '02 Lexus with a 3.0L, 153k miles for one of my kids, and no idea when/if the timing belt was done last. I checked it over pretty thoroughly, but forgot to ask about maintenance records when I picked it up. I texted the PO and she said something about (not that long ago)...
  16. R

    Need help with adoption issues re: deceased parent

    That's awful. Sorry to hear.
  17. R

    Cobra. Plug on Left Side of Drive

    I can confirm that everything seems fine with that little plug out - on the water. On land, probably not. Kinda what I thought. I couldn't get the threads to take at all this year when de-winterizing (there was grit in there or something; but don't know why exactly), so I put it in and put...
  18. R

    aluminum wheels stuck to hub

    How'd the aluminum rim weather that? I've got a front hub/rotor (RWD truck) that apparently is out of tolerance because wheels stick on it. I add just a little grease if I remember to. Getting them off is a heavy rubber mallet or deadblow hammer on the inside sidewall of the tire while...
  19. R

    Failed exhaust flappers

    I've got a rigged-up single flapper on the bottom of the pipe that has worked for me for a while. Maybe I've just been "lucky"? Mine's the 4.3L Cobra; don't know if it'd work for yours or not. I don't recommend it based on the more cautious opinions; I'm just sharing my experience. My boat...
  20. R

    88 OMC 4.3L V6 - Sitting for about 10 Months - Question

    Thanks, Lou. Those are exactly what I had in mind trying next, from one of your past posts; just haven't made it happen yet.
Top