Search results

  1. Rasdiir

    198x SS-150 rebuild

    So I got back on it today for a bit and decided to try and align the windshield so I can permanently mount the consoles and start on the bow seat framing. When I placed the windshield on using the original bolt holes the centre panel was almost 2” away from where it should hit the driver side...
  2. Rasdiir

    boat foam?

    I wouldn't advise running wiring under the floor unless it was on top of the foam and directly under the floor, seems like it would be a pain to get at if anything needed fixing, you would have to take up the whole floor. I wrapped my floor in separate sections to make it easier to pull up if...
  3. Rasdiir

    boat foam?

    I was able to fit between 4-5 2" pieces in between each set of ribs, and I left at least one of the centre pieces slightly smaller so they would be raised off the bottom, they are just held up by being glued with PL Premium to the other pieces in that section, that helps water from the sides run...
  4. Rasdiir

    boat foam?

    My pleasure! I actually just installed the foam in my SS-150 rebuild, I chose to cut the triangles. Here's a photo for reference:
  5. Rasdiir

    1973 starcraft ss restore in progress

    I think pic and vid posting isn't working across the site right now, I get a warning at the top of the page when I log in
  6. Rasdiir

    boat foam?

    Not really, just cut it to fit and place it in the bottom. Some people go through the extra effort of cutting tons of little triangles to maximize the amount they can fit, others just lay it flat the long way. Although there is a wealth of knowledge on SS-16 rebuilds from the fine folks in this...
  7. Rasdiir

    198x SS-150 rebuild

    Had a good week visiting family, and got back home on the 30th, so I still had 6 days to make some progress before I went back to work this past Thursday. I started with installing two braces at the rear to tie the transom and sides together. I saw this in some photos of another model boat...
  8. Rasdiir

    198x SS-150 rebuild

    Currently on vacation visiting family, but I'll still have a week off work when I return, so the foam and floor will be installed, I will be painting the underside of the consoles and then attaching them, and I'll start on the framing for the storage boxes in the rear.
  9. Rasdiir

    1981 Springbok 18' Restoration/Renovation

    Beautiful job, I love the colour!
  10. Rasdiir

    198x SS-150 rebuild

    After most of a year away from this project the slowest Starcraft resto ever attempted is back underway! I did manage to complete the floor last Sep before I packed up for winter (more on floor below), but spring this year was horribly cold and wet, and also I was busy getting ready for my...
  11. Rasdiir

    198x SS-150 rebuild

    After 48 hours the boards were just damp, so I figured that was enough OTF for the bottom. I flipped them all over and put on 2 coats of OTF on the top. Hopefully that will be enough for that side too and I can start with the straight spar varnish tomorrow. I need to pick up a few more paint...
  12. Rasdiir

    1973 StarCraft SS 16 Restore

    That boat's in great shape, even the cushions and seats! It looks like there's some cracking on the knee brace wings that bolt to the transom. Some weld that and others, including me, just cut off the originals and bolt or rivet on some new ones out of angle aluminum. You can see my effort...
  13. Rasdiir

    198x SS-150 rebuild

    Got the mounting holes drilled, t-nuts installed, second backer plates glued and screwed on, and 2 coats of OTF on. I messed up and forgot to install the t-nuts for the future B2B seat prior to gluing the second backer plates, so I installed them after and will screw on a small aluminum plate...
  14. Rasdiir

    1973 StarCraft SS 16 Restore

    Apparently you can link to Onedrive or Dropbox for pics, I just upload them to imgur.com and link them here and that's been working. During my tear down I took pictures of every inch of the boat, from both angles and often with a measuring tape visible, both before and after removing things. 3...
  15. Rasdiir

    198x SS-150 rebuild

    I still want to do a B2B seat that can go over the removable pedestal, I was hoping to find one that unfolds but if not then two regular seats placed B2B will work. I finished sanding all the floor pieces and ordered and received the removable pedestal mount for the passenger side, I went with...
  16. Rasdiir

    198x SS-150 rebuild

    If I can't find a seat that unfolds from both ends I think a box with two seats facing opposite will be my only option, I would just lose the unfolding capability.
  17. Rasdiir

    Shoestring Starcraft SS160 Resto-mod - let the long slow road begin

    I see in the pics here: https://forums.iboats.com/threads/shoestring-starcraft-ss160-resto-mod-let-the-long-slow-road-begin.721077/post-5752612 that you did the same thing I'm planning on, having a pedestal and removable B2B seat on the passenger side. I was measuring out my seat placement today...
  18. Rasdiir

    198x SS-150 rebuild

    Went out today to finalize the placement of those backer plates and it turns out the starboard stringer runs directly beside the left side of the seat base, so now there will be a total of three bolts that are near the edge of the backer plate. I really don't see another way to mount these, so I...
  19. Rasdiir

    198x SS-150 rebuild

    Basically because the brace is in the way I can't move the backing plate further to the rear, and I don't want to move the seat any further forward, so two of the bolts will be within 1" of the rear edge of the backing plate. I was thinking of doing separate backing plates on either side of the...
  20. Rasdiir

    1980 SS 181 rebuild.

    I'm interested in responses about the glue, I've also been debating what to use and I'm going to be ready to wrap in a few weeks.
Top