!!!1952 johnson brought back to life!!!

[aganser]

Re: !!!1952 johnson brought back to life!!!

Congrats on the new old motors!

As mentioned earlier you can get help here:

http://www.aomci.org/cgi-bin/yabb2/YaBB.pl?board=askamember

Also please remember to use the proper fuel/oil mix for your motors.

I think they use a 24:1 ratio but the guys on the Antique Outboard website can be better help. Any TCW3 oil can be used, including synthetics.

Good Luck!

Bob

 

[KDT1961]

Re: !!!1952 johnson brought back to life!!!

hey todd,

I torqued it to the specs, we have no idea why it came loose and continued to but i fixed it now, lock washer and i had to damage a thread but it works, the coils points and condencers are new so im good there for a while with the bad plugs it was causing a bad vibration, a misfire on number 1 cylinder, so it made it worse, but now all is good

I haven't forgotten about the .PDF files for your manual. I tried to email them to you but they were way too large for my mail server. I may try to email one chapter at a time.