FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
bought this motor and am trying to start it turn the key the starter spins but dont go up and engage the flywheel. and how many rpms is it suppose to spin? battery has a full charge is it a starter problem?
First remove all connections from the starter and the battery. Sand connections bright clean. Take the battery to Sears or womewhere & get a load test. Put a light coat of grease on the surfaces of all connectors and reconnect. If that dosen't do it check the solonoid. Also clean the shaft that the bendix gear rides on & rotate by hand to make sure that it is free.<br /><br />Starters do go bad but it is usually the other stuff. If your starter is bad take it to an electric motor repair place rather than buying a new one (big $$ for new).
tlflash: Can you manually move the bendix gear up the shaft to the flywheel? If you can, check that it spirals up the starter shaft.<br /><br />Fair Skys, Smooth water
yes i can move it. if i hit the key and push on the bottom of the bendix it goes right up other than that it just spins i cleaned the shaft all up it looks fine
tlflash,<br /><br />I just purchased a 1976 ranger bass boat and had a similar problem with my mortor starting. Have you replaced the starter solenoid?
