1981 60hp tilt trim unit?

[white rat]

Re: 1981 60hp tilt trim unit?

I'll try him but $450 is nuts, $550 get a new CMC plate up here so he'd have to move a bunch on a used unit.

The tilt unit came with the boat but I couldn't see how it would have the power to lift the boat while it was running, I also wondered if it was even a OMC part.

ACAMS, PM to you Mr.

Just because there isn't enough pics in this thread, here's the mini death trap I'm working on.

 

[Bigjakes12]

Re: 1981 60hp tilt trim unit?

That is for the V4 .... it is not going to work on a 2 cylinder .......... What will you give me for mine?

OH CRAP....... I am in Texas ..... You are a few miles north of me!

Any chance you'd part with the pump? I replaced the motor & a hose & found the pump was toast. Toake maters worse, I tried to take it apart... Now I can't find a replacement.


Thanks,
Keith

 

[ACAMS]

Re: 1981 60hp tilt trim unit?

Just because there isn't enough pics in this thread, here's the mini death trap I'm working on.

NAW ...... that boat needs a 75 Stinger!

 

[white rat]

Re: 1981 60hp tilt trim unit?

Too small for a 70 triple and the mini voodoo was only rated for 20-40hp. Also the triples are 50+ lbs heavier than the 2 cylinders.

There are guys out there with 40hp going 50mph. I think in this case, smaller is better.