1995 Crownline 202BR Restore

[beta]

If you use any gasket maker, I would suggest one rated for high heat.

The Permatex ultra blue is rated to 400 so I would hope that is plenty high enough.
I guess I'll do it dry and cross my fingers. Service manual doesn't say to use anything so it makes sense. The fact that there was something on it is what got my attention.

 

[MikeSchinlaub]

The fact that there was something on it is what got my attention.

Have you checked that the surfaces are flat? Maybe there was some warping or pitting or something.

 

[beta]

Have you checked that the surfaces are flat? Maybe there was some warping or pitting or something.

Have not cleaned up the surfaces yet but no obvious issues. I'll get the surfaces cleaned up this weekend and recheck for issues. I posted over in the engine forum as well.

 

[beta]

FYI... got an answer from the engine forum. It's 92-25234 Sound blanket glue, but this has been superseded by Bellows adhesive 86166Q1. It's in the materials list in the manual but not in the actual instructions.