1995 Johnson tilt trim problem

tenntomt

Recruit
Joined
Apr 17, 2010
Messages
3
I have a 1995 Johnson Faststrike 175. For some reason the engine will tilt up or down on its own. I have replaced both relays but still have the problem. Does anyone have a wiring diagram for this particular engine. If anyone has had this problem and found a fix I would appreciate it.
 

marinemech1

Chief Petty Officer
Joined
Mar 26, 2005
Messages
623
Re: 1995 Johnson tilt trim problem

most likely culprit is the trim switch mounted on the pan...disconnect it and problem should go away.
Wayne
 

tenntomt

Recruit
Joined
Apr 17, 2010
Messages
3
Re: 1995 Johnson tilt trim problem

Thanks Wayne, tried that with no success. Also disconnected trim switch on front panel. Only switch I counldn't eliminate was the one in the throttle handle. What has me stumped is it fails in both directions. Sometimes after I put everything back together it waits about 3-5 minutes then fails. If I could find a wiring diagram maybe it would help.
 

tenntomt

Recruit
Joined
Apr 17, 2010
Messages
3
Re: 1995 Johnson tilt trim problem

I was hoping to avoid the expense of buying a manual. But if no one has the diagram I guess that is the way to go. Perhaps someone has the manual and can send it. Thanks for your advise.
 
Top