1995 Johnson tilt trim problem

tenntomt

Recruit
Thread starter
Joined
Apr 17, 2010
Messages
3
I have a 1995 Johnson Faststrike 175. For some reason the engine will tilt up or down on its own. I have replaced both relays but still have the problem. Does anyone have a wiring diagram for this particular engine. If anyone has had this problem and found a fix I would appreciate it.
 

marinemech1

Chief Petty Officer
Joined
Mar 26, 2005
Messages
623
Re: 1995 Johnson tilt trim problem

most likely culprit is the trim switch mounted on the pan...disconnect it and problem should go away.
Wayne
 

tenntomt

Recruit
Thread starter
Joined
Apr 17, 2010
Messages
3
Re: 1995 Johnson tilt trim problem

Thanks Wayne, tried that with no success. Also disconnected trim switch on front panel. Only switch I counldn't eliminate was the one in the throttle handle. What has me stumped is it fails in both directions. Sometimes after I put everything back together it waits about 3-5 minutes then fails. If I could find a wiring diagram maybe it would help.
 

tenntomt

Recruit
Thread starter
Joined
Apr 17, 2010
Messages
3
Re: 1995 Johnson tilt trim problem

I was hoping to avoid the expense of buying a manual. But if no one has the diagram I guess that is the way to go. Perhaps someone has the manual and can send it. Thanks for your advise.
 
Top