1999 50hp 4-stroke EFI E50PL4SS WP valve

schematic

Lieutenant Junior Grade
Joined
Jan 12, 2008
Messages
1,102
Hi Gentlemen. I have a WP impellar that shrapnel-ed and I would like to try and find its pieces. Does anyone know where the water pressure valve resides?

Thanks in advance.
 

boobie

Supreme Mariner
Joined
Nov 5, 2009
Messages
20,826
Re: 1999 50hp 4-stroke EFI E50PL4SS WP valve

In the power head. Good luck.
 

Bosunsmate

Admiral
Joined
Apr 7, 2012
Messages
6,135
Re: 1999 50hp 4-stroke EFI E50PL4SS WP valve

Look up an image for this part, the valve is in there
5031427 — CASE, WATER PRESSURE VALVE
 

clanton

Rear Admiral
Joined
Jul 9, 2001
Messages
4,876
Re: 1999 50hp 4-stroke EFI E50PL4SS WP valve

If its the engine I`m thinking about, the power head will have to come off.
 

boobie

Supreme Mariner
Joined
Nov 5, 2009
Messages
20,826
Re: 1999 50hp 4-stroke EFI E50PL4SS WP valve

Clanton, found valve and part # but couldn't find exactly where it's located ?? Just for my own info.
 

schematic

Lieutenant Junior Grade
Joined
Jan 12, 2008
Messages
1,102
Re: 1999 50hp 4-stroke EFI E50PL4SS WP valve

If its the engine I`m thinking about, the power head will have to come off.

I think you might be right clanton. Can't seem to spot it on the surface. Who would design such a thing?! :(
 

schematic

Lieutenant Junior Grade
Joined
Jan 12, 2008
Messages
1,102
Re: 1999 50hp 4-stroke EFI E50PL4SS WP valve

Look up an image for this part, the valve is in there
5031427 — CASE, WATER PRESSURE VALVE

Thanks Bosunsmate, but still no clue where it is on the engine.....
 

Bosunsmate

Admiral
Joined
Apr 7, 2012
Messages
6,135
Re: 1999 50hp 4-stroke EFI E50PL4SS WP valve

Sorry ive never seen it either.
If only these design engineers had their ph numbers listed
 

boobie

Supreme Mariner
Joined
Nov 5, 2009
Messages
20,826
Re: 1999 50hp 4-stroke EFI E50PL4SS WP valve

Maybe you could get some info from Suzuki as they built it.
 

clanton

Rear Admiral
Joined
Jul 9, 2001
Messages
4,876
Re: 1999 50hp 4-stroke EFI E50PL4SS WP valve

I may have a manual, will look tomorrow might get lucky. I did one can`t remember engine or details, but 2 choices cut large hole in exhaust housing., or remove power head. The valve was stuck open with trash, engine run hot.
 
Top