50 Mercury power trim and tilt problem

Valricobob

Recruit
Joined
Jul 7, 2007
Messages
2
I have a 1995 50 Mercury with very low hours. Was going to use it this week but noticed the power trim and tilt will go down but not up. Only clicks when the up button is pushed. Any suggestions?
 

Laddies

Banned
Joined
Sep 10, 2004
Messages
12,218
Re: 50 Mercury power trim and tilt problem

If the pump motor only clicks in both up and down, the motor probably has a stuck brush or a bad brush
 

Valricobob

Recruit
Joined
Jul 7, 2007
Messages
2
Re: 50 Mercury power trim and tilt problem

The pump motor runs normally going down, but not going up. It does the same using either the up/down button on the motor or on the thumb control.
 

Troyes

Recruit
Joined
Jul 17, 2007
Messages
1
Re: 50 Mercury power trim and tilt problem

Hi. I had this problem last year. I changed the 2 relays for the trim. :)

Mombo

P.S. I'm new to this forum and it seem's nice. Also i'm french, so sorry for my english !! ;)
 
Top