Clams Canino
Commander
- Joined
- Jan 10, 2004
- Messages
- 2,179
Yes.. I actually have a question - becuse this is no tthe type of motor I usually deal with.
2001 60ELPT BF (Big Foot) Serial OT293630P
As I understand the operation - when choking for cold start an AC voltage is applied to the enricher valve unit (via the ECM) to RAISE the valve needle out of it's seat and let some extra fuel spill into the works. Same if you depress the choke button via the key.
I popped it out and cannot see ANY movement when cranking the beast cold - with or without the choke button.
I'll note that the unit ohm's out fine via it's two blk/yel wires, and moves freely by hand.
I'm suspecting the ECM - but I want a second opinion - and a correct method to test the enricher, if any.
-W
2001 60ELPT BF (Big Foot) Serial OT293630P
As I understand the operation - when choking for cold start an AC voltage is applied to the enricher valve unit (via the ECM) to RAISE the valve needle out of it's seat and let some extra fuel spill into the works. Same if you depress the choke button via the key.
I popped it out and cannot see ANY movement when cranking the beast cold - with or without the choke button.
I'll note that the unit ohm's out fine via it's two blk/yel wires, and moves freely by hand.
I'm suspecting the ECM - but I want a second opinion - and a correct method to test the enricher, if any.
-W