Yep, get a fine point brush from Michaels and a 1/2 Pint of Rustoleum oil paint and paint those letters. It's not that hard to do and it'll make it POP!!!! I'd clear coat it afterwards.
![]()
Yeah, West Marine are extortionists. Good ol' c-listI figured there would be lots of leftover supplies down there. You're in the skiff capitol of the world afterall. Lot of little, and not so little, boat companies down there which use composite materials almost exclusively to build their super-light, super-strong, super-expensive flats skiffs. I'd love to go to their factory and watch the do a vacuum, resin-infused build it's pretty amazing and you barely leave a drop of resin on the shop floor. Here's a vid of it in action. Almost makes using f-glass look easy....almost.
2 minute Boat Build - YouTube
YepGot the handles done. You still think I should go for the red and blue handle tops?



Since these pix were taken, I removed the white caulking from the starboard side where the coner piece was missing. The transom is solid as a rock. I have used a phenolic hammer and there was no flex at all during tank test going in and out of gear. Plus I gave a good amount of pulling having it locked in the raised position, still no flexing.