8 hp E'rude 1990 ... bonehead move

[Tim Frank]

Ran this engine with no oil in the gas for about 5 minutes. Yes, I know.
It started to slow down ... and stopped.
Did NOT actually seize,
I am going to fog it several times and run it on double oil for 1/2 hour or so.

Anyone else has success doing something else/additional?

Thanks in advance.

 

[Mc Tool]

That might get the piston moving in the bore but you cant undo the damage . You should now consider your engine wounded , and hope the big end is ok
You aint the 1st and you wont be the last .

 

[racerone]

Post results of a compression test.----Actual numbers.-----Or remove cylinder head and inspect cylinder walls.----Head gasket is cheap.

 

[saltchuckmatt]

To bad...awesome motors.

 

[kbait]

if compression #’s are adequate (over 50), run it. If it will idle down slow, you got lucky!

 

[Mc Tool]

if compression #’s are adequate (over 50), run it. If it will idle down slow, you got lucky!

yeah , quite a bit over 50 .