imported_JamesL
Cadet
- Joined
- Feb 7, 2007
- Messages
- 20
Hi Guys,
I have an older modle 85hp Johno and am having problems fitting a new tacho. I have a constant 12V supplied to the red and black wire when the ignition is on. there is a purple wire there from an old broken tacho which i thought would be sending the rpm from the motor but when i plug it in and start the motor nothing happens. with the ignition on i measured 4V between the purple wire and the black wire.
Any suggestions on why it wont work?
I have an older modle 85hp Johno and am having problems fitting a new tacho. I have a constant 12V supplied to the red and black wire when the ignition is on. there is a purple wire there from an old broken tacho which i thought would be sending the rpm from the motor but when i plug it in and start the motor nothing happens. with the ignition on i measured 4V between the purple wire and the black wire.
Any suggestions on why it wont work?