FORUM RULES UPDATED - The forum rules have been updated to continue to provide a friendly and safe environment for our member community. Please take a moment to review the updated rules and our terms of use and privacy policy. Click here for Forum Rules which has links to the 'terms of use' and 'privacy policy'.
In Other News . . .
You will notice a few enchancements to the forums to make your experience better. These include: Email Notifications, Thread Previews, Thread Starter Notation, and Emoji Options on the 'Like' icon. . .
Additionally, the merchant portions of the website have been updated and are now operational. . . . Check out iBoats for all your boating gear.
I just did my 9.8 new impeller install yesterday... i had no issues.. and i can help.. but i dont know what your asking.. can you post a pic and explain in a little more depth what your needing help on.. i can help....
I do not know how to post a picture on this form,but maby if you could explain how it gos back together.I know it sounds silly I cant get the key in the slot when the impeller is in the pump housing maby you can tell me what I am missing.Thanks for the reply.
OK i think i know exactly what your talking about.. if your talking about that lil rectangle silver piece that sits on the side of the shaft and the impeller goes around it.. then i can help.. i kept trying to put the key on the shaft first and then slide the impeller over it and it would push it down and not let it go on... so i did this.. i put a lil grease on the shaft where the key sits.. and that helped with it sticking to it.. once i put a lil grease on there.. i slid the impeller down the shaft to where it is supposed to be.. then used a tiny screwdriver to push the key into place.. and viola!... set perfect.. if your still having issues.. tell me and ill email you my phone number and walk ya through it.. if ya need it..
Thank you!!!! I will let you know.I am not getting all the water out pee hole is what started all this I thinh I have A gasket bad water out exoust hole.
Ok... On the inside of the impeller there is an indent that the raised side of the keu sites in... Just make sure the impeller is turned to the proper side and it will fit in perfectly... Like I said.. I'd be happy to walk ya through it on the phone if yad like... Just say the word...
