Another Yamaha Idleing Problem

[Scout Sport Fish]

Ok so I start up my 2000 130 HP 2 stroke and it runs "ok" after a couple secs it slowly spins down to about 5-600 RPM and then spins down to literally like 5 RPM and cuts out. Now its ok if I give it a little gas while not in drive to keep it at 10000 RPM and it runs great at WOT. Could the idle screw just vibrated loose or is a deeper problem such as fuel flow or carbs?

Thanks in advance.

 

[Ray Neudecker]

Re: Another Yamaha Idleing Problem

Check the idle timing screw to be sure it hasn't vibrated loose as well as the idle air screws.

 

[dpfundst]

Re: Another Yamaha Idleing Problem

Hi,

Where is the idle adjustment screw located on a 90HP 2 stroke 90LTRZ

Thanks
Dwight

 

[Scout Sport Fish]

Re: Another Yamaha Idleing Problem

Well turns out it just needed a new fuel/water seperator. The one that was originally on was WAY to small for the engine and gas tank so I got a whole new rig on.