Boyensen ?

[clouma]

Did someone ever install a kit of Boyensen reeds part number 234 on a Force engine ?<br /><br />I am on my way to install mines on my 75-hp 1998 and in the instruction sheet they say to discard reed stops if there are rev plates provided in the kit, which this is I have, but somewhere at the end there is a note saying for Force/Chrysler installed stock reed stops ???<br /><br />I am confused <br /><br />Momo

 

[north40]

Re: Boyensen ?

Momo, You should post this in the Chrysler, Force Repair. I'm sure those guys will be glad to help. Goodluck,<br />Bob

 

[walleyehed]

Re: Boyensen ?

momo05 before we get moved, the reed stop is for the stock stainless reedplates only...in all cases I know of, the reeds come with a plate that covers the pivot side of plates, and there is no stops-unless they are in the kit. If the stops (factory) are installed with the boyesens, unless specified to do so, engine performance will be poor.

 

[moderator1]

Re: Boyensen ?

Let's see if some of the Force gurus can give some insight...moving to Force, Chrysler...

 

[clouma]

Re: Boyensen ?

Thanks Kenny !