Bravo Shift cable tool (drive end)

[Speakrdude]

Can someone measure the thickness of the shift cable tool that sits on the bell housing.
Thanks!

 

[alldodge]

Can someone measure the thickness of the shift cable tool that sits on the bell housing.
Thanks!

Its 0.250

 

[Mischief Managed]

When my cable is properly set, the underside of the cable end is 7/8" from the face of the bell housing, in neutral. See: https://www.facebook.com/photo.php?fbid=1500213677247&l=f93ee53cf7

 

[alldodge]

When my cable is properly set, the underside of the cable end is 7/8" from the face of the bell housing, in neutral. See: https://www.facebook.com/photo.php?f...7&l=f93ee53cf7

Agree with the 7/8 once the other end is adjusted using the cable extension tool and it's installed within spec.


Now if you have a band new cable it should be pre-adjusted and all you need to do is adjust the height (3 inch) of the pivot point and install, no other adjusting is required.

 

[Speakrdude]

Thanks all!