Can I repair my pull starter?

[woebkete]

I have a 1996 6 horse Johnson J6RLEDD.
The pull cord does not retract immediately. It takes quite a while.
I was told that taking it off and cleaning should best be left for someone
who really knows what they are doing. Any help/suggestions?

 

[tashasdaddy]

Re: Can I repair my pull starter?

first try spraying some WD 40 into it.

 

[McGR]

Re: Can I repair my pull starter?

A pull starter is not rocket science. If you feel up to the task, I'd say go for it. If you follow the link below you can get a parts diagram that will give you an idea of what you're up against. Also, getting a service manual isn't a bad idea.

http://epc.brp.com

 

[rjezuit]

Re: Can I repair my pull starter?

The biggest problem is letting the spring get away from you and uncoil. Be careful when taking it apart as there is stored rotational energy in the spring. I would go the WD-40 route first myself. It helps in a large percentage of problems. The parts get gummed up with oil and dirt.

 

[woebkete]

Re: Can I repair my pull starter?

I finally got around to trying the WD-40.
Looks like it is working great.
Thanks.