Carb Rebuild Kit

P

pmergler

Seaman
Joined
Jul 6, 2006
Messages
60
I am in need to purchase a carb rebuild kit for my '65 33 hp 'Rude. Where is the best place to purchase one? I found the list of them here on iboats, but I am unable to determine if any of the kits are made for my motor. In the OMC #s that the kit replaces I don't see any numbers that match any of the OMC #s from the original parts catalog for the carb assembly. Are the OMC numbers with the carb kits cooresponding to an OMC carb kit # or should it coorelate to an OMC number from the carb assembly? If it is an OMC carb kit # then how can I get the carb # that goes to my motor, it isn't listed in the parts catalog manual?

Also what all is contained in a rebuild kit? Or what should I be replacing when I redo a carb? Below is what I think I should be replacing with this rebuild:
- new plastic float
- gaskets (carb to manifold, body to chamber and valve seat)
- Valve seat
- core plug & misc plugs (fuel passage, etc).
But I don't know if the kit should come with new vavle packing nuts & washers, new valve needles, etc.

Anyone who could provide a comprehensive list of what I should find in a rebuild kit and where I can find the right rebuild kit, it would be greatly appreciated.

Thanks in advance,
Patrick
 
tashasdaddy

tashasdaddy

Honorary Moderator Emeritus
Joined
Nov 11, 2005
Messages
51,019
Re: Carb Rebuild Kit

laingsoutboards.com has everything you need , have to order float separate form kit. jeff is very good to work with.
 
P

Paul Moir

Admiral
Joined
Nov 5, 2002
Messages
6,847
Re: Carb Rebuild Kit

Latest P/N for your carb kit is 439074. 18- numbered aftermarket kits don't have the float but like tashasdaddy says Laing's sells it seperate.
All include everything listed and include packing but not the brass nuts themselves. Float needle is included too. The rubber tipped ones have a little spring you use to lash it to the float so the float pulls it out of the seat if it gets stuck.
439074 ($24):
439074LRG.jpg

18-7010 ($13):
SIE-187010.jpg
 
tashasdaddy

tashasdaddy

Honorary Moderator Emeritus
Joined
Nov 11, 2005
Messages
51,019
Re: Carb Rebuild Kit

you'll need joe reeves carb settings when done. email me and request, click name to get address also will probably need a link and sink thats in the manual.
 
P

pmergler

Seaman
Joined
Jul 6, 2006
Messages
60
Re: Carb Rebuild Kit

I got the manual to do the link and sink. Also, I have read over joe's carb settings several times and have that. Although quick question on that....when it says to "gently" seat the high and low needles I take it that means gently seat them screwed all the way in? Sorry never worked on a carb before.

Thanks,
Patrick
 
P

pmergler

Seaman
Joined
Jul 6, 2006
Messages
60
Re: Carb Rebuild Kit

cool thanks guys! Big help! I also talked to Jeff at Laings and ordered the float...still only cork, oh well :/
 
You must log in or register to reply here.
Top