Control box re... Do ish?

relocyo

Chief Petty Officer
Joined
Apr 14, 2010
Messages
446
Of course this is a very basic old dual control, I spent 2 days ( working on and off :rolleyes:)to strip the 26 layers of paint off, they haveboth been stripped with sandpaper , orbital sander, and lastly a fine wire brush , (and then 600 grit :D ) one has primer drying, looks good so far, should be able to finish this tomorrow.... Hopefully.... Will post more pics... Lookin ok? Budget says paint, not replace, ive got the paint to spray after primer hardens...
 

Attachments

  • IMAG0315.jpg
    IMAG0315.jpg
    143.7 KB · Views: 0
  • IMAG0313.jpg
    IMAG0313.jpg
    149.8 KB · Views: 0
  • IMAG0314.jpg
    IMAG0314.jpg
    150 KB · Views: 0
  • IMAG0311.jpg
    IMAG0311.jpg
    144.3 KB · Views: 0

oops!

Supreme Mariner
Joined
Oct 18, 2007
Messages
12,932
Re: Control box re... Do ish?

nothing wrong with restoring stock stuff.....it looks great......good job on the prep for paint.

how are the guts of the thing? are they in good working order?....smooth?
 

relocyo

Chief Petty Officer
Joined
Apr 14, 2010
Messages
446
Re: Control box re... Do ish?

nothing wrong with restoring stock stuff.....it looks great......good job on the prep for paint.

how are the guts of the thing? are they in good working order?....smooth?

Inside parts cleaned up great too, with the exception of the plastic centerpiece that seperates the two handles, it is cracked and brittle, gonna try to find something at home depot to fabricate a new one... Maybe a piece of polycarbonate... Thanks oops, It did take lots of prep, the reason being every single thread ive read emphasizes the importance of prep.... And the guys that prepped well ended up with a great paint job...
 

oops!

Supreme Mariner
Joined
Oct 18, 2007
Messages
12,932
Re: Control box re... Do ish?

yeah....that stupid plastic insert is a real pain......keep your eyes open on ebay....you might get lucky !
 

relocyo

Chief Petty Officer
Joined
Apr 14, 2010
Messages
446
Re: Control box re... Do ish?

I know this is for my own amusement, but it actually took a bit of work to get the 30 or so coats of old paint off it... This is with a couple coats of good ole rustol' gloss white after the primer, and lots of sanding (i like perfection) the grey messed up part is just tape that was used for masking, the other grey (uicksilver) will get sprayed black tomorrow.... The 2nd pic is where a mother flippin gnat landed on my wet white paint...grr.. Gonna sand that out 2morrow too... I think its lookin good eh?
 

Attachments

  • IMAG0316.jpg
    IMAG0316.jpg
    146 KB · Views: 0
  • IMAG0317.jpg
    IMAG0317.jpg
    159.5 KB · Views: 0
Top