1970 Evinrude 60HP 60073D Electric Shift.
I had my boat out over the weekend for the first time since I got it tuned at the marina. Now this is the first time the motor ran so good that I didn't need to paddle. Motor runs at idle and throttles up to full rpm absolutely great.
After running it for 2 days without issues I was driving along at WOT and the motor started coughing so I dropped revs and it ran good for a min then coughed again lowered revs and ran fine for a min etc... until i was idling fine, it never quit.
After pumping the squeeze ball on the fuel line it would reach WOT for 2 mins and start the cycle again. Anyone ever have this issue before?
Second issue I have is a clicking noise when in reverse. Does not do it in forward just reverse. When it is clicking it does not have any pulling power in reverse. Is it what I would assume to be a slipping reverse gear or worn gear?
Should I start looking for a used lower unit or could I repair this one?
I had my boat out over the weekend for the first time since I got it tuned at the marina. Now this is the first time the motor ran so good that I didn't need to paddle. Motor runs at idle and throttles up to full rpm absolutely great.
After running it for 2 days without issues I was driving along at WOT and the motor started coughing so I dropped revs and it ran good for a min then coughed again lowered revs and ran fine for a min etc... until i was idling fine, it never quit.
After pumping the squeeze ball on the fuel line it would reach WOT for 2 mins and start the cycle again. Anyone ever have this issue before?
Second issue I have is a clicking noise when in reverse. Does not do it in forward just reverse. When it is clicking it does not have any pulling power in reverse. Is it what I would assume to be a slipping reverse gear or worn gear?
Should I start looking for a used lower unit or could I repair this one?
Last edited: